cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
1,018 Views
Registered: ‎05-28-2014

Can't SD boot on ultrascale Zynq

Jump to solution

Hello,

 

I have difficulties booting zynq ultrascale with SD.

I use sandisk 16G SD.

I see in the following list that there is mention of sandisk 16G, so I am not sure why it does not boot.

 

Is it because only uhs-1 should be used instead of non-uhs ?

 

The list I found is here:

 https://www.xilinx.com/support/answers/66779.html 

 

Thank you,

ranran

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Explorer
Explorer
1,035 Views
Registered: ‎05-28-2014

Hi Stephen,

 

For now, we decided to leave aside the sd boot, because we can boot from jtag.

 

Thank you very much,

ranran

View solution in original post

0 Kudos
4 Replies
Highlighted
Moderator
Moderator
920 Views
Registered: ‎09-12-2007
What do you see when you try boot? Is there anything displayed on the serial port?
0 Kudos
Highlighted
Moderator
Moderator
919 Views
Registered: ‎09-12-2007
Also, does the init_b constantly toggle. This would tell you that the boot rom is looping for the boot image
0 Kudos
Highlighted
Moderator
Moderator
917 Views
Registered: ‎09-12-2007
Also, does the init_b constantly toggle. This would tell you that the boot rom is looping for the boot image
0 Kudos
Highlighted
Explorer
Explorer
1,036 Views
Registered: ‎05-28-2014

Hi Stephen,

 

For now, we decided to leave aside the sd boot, because we can boot from jtag.

 

Thank you very much,

ranran

View solution in original post

0 Kudos