UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
855 Views
Registered: ‎05-28-2014

Can't SD boot on ultrascale Zynq

Jump to solution

Hello,

 

I have difficulties booting zynq ultrascale with SD.

I use sandisk 16G SD.

I see in the following list that there is mention of sandisk 16G, so I am not sure why it does not boot.

 

Is it because only uhs-1 should be used instead of non-uhs ?

 

The list I found is here:

 https://www.xilinx.com/support/answers/66779.html 

 

Thank you,

ranran

0 Kudos
1 Solution

Accepted Solutions
Explorer
Explorer
872 Views
Registered: ‎05-28-2014

Re: Can't SD boot on ultrascale Zynq

Jump to solution

Hi Stephen,

 

For now, we decided to leave aside the sd boot, because we can boot from jtag.

 

Thank you very much,

ranran

View solution in original post

0 Kudos
4 Replies
Moderator
Moderator
757 Views
Registered: ‎09-12-2007

Re: Can't SD boot on ultrascale Zynq

Jump to solution
What do you see when you try boot? Is there anything displayed on the serial port?
0 Kudos
Moderator
Moderator
756 Views
Registered: ‎09-12-2007

Re: Can't SD boot on ultrascale Zynq

Jump to solution
Also, does the init_b constantly toggle. This would tell you that the boot rom is looping for the boot image
0 Kudos
Highlighted
Moderator
Moderator
754 Views
Registered: ‎09-12-2007

Re: Can't SD boot on ultrascale Zynq

Jump to solution
Also, does the init_b constantly toggle. This would tell you that the boot rom is looping for the boot image
0 Kudos
Explorer
Explorer
873 Views
Registered: ‎05-28-2014

Re: Can't SD boot on ultrascale Zynq

Jump to solution

Hi Stephen,

 

For now, we decided to leave aside the sd boot, because we can boot from jtag.

 

Thank you very much,

ranran

View solution in original post

0 Kudos