UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
5,919 Views
Registered: ‎11-21-2014

Configuration for Internet in Zc702

Hi all,

 

I would like to connect to internet in Zc702 board, but I have difficulty configuring. The boot mode is set to SD card and it runs peta linux.

 

Any help is welcome.

0 Kudos
3 Replies
Xilinx Employee
Xilinx Employee
5,915 Views
Registered: ‎08-01-2008

Re: Configuration for Internet in Zc702

check this document

http://www.xilinx.com/Attachment/47764/ZC702_DS5_2.pdf
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos
Xilinx Employee
Xilinx Employee
5,915 Views
Registered: ‎08-01-2008

Re: Configuration for Internet in Zc702

check this as well

http://forums.xilinx.com/t5/Embedded-Development-Tools/using-both-CPU-cores-on-Zynq/m-p/295563#M26068
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos
Explorer
Explorer
5,909 Views
Registered: ‎11-21-2014

Re: Configuration for Internet in Zc702

Hi @balkris , I am able to have ethernet connection to the Zynq arm. But I am not able to get Internet connection. The pdf you attached only works for getting ethernet  connection. The settings for internet for eth0 (ifconfig, dhcp,etc) needs to be changed I believe.

 

Kind regards,

Milan

 

0 Kudos