UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor yywilson
Visitor
2,411 Views
Registered: ‎10-18-2017

Configure env parameters of U-boot from petalinux

Jump to solution

I am using petalinux 2017.2. Under u-boot command line and enter command "printenv", the list of environment parameters are shown. I know how to modify and save them with "setenv" and "saveenv". But is there a way to modify a file contains the parameters in petalinux? Then I do not have to modify the parameters every time download to a new device.

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
3,063 Views
Registered: ‎12-04-2016

Re: Configure env parameters of U-boot from petalinux

Jump to solution

Hi

 

Please check the below answer record, which gives an example of adding/modifying uboot environment variables

https://www.xilinx.com/support/answers/69780.html

 

 

Best Regards

Shabbir

0 Kudos
1 Reply
Moderator
Moderator
3,064 Views
Registered: ‎12-04-2016

Re: Configure env parameters of U-boot from petalinux

Jump to solution

Hi

 

Please check the below answer record, which gives an example of adding/modifying uboot environment variables

https://www.xilinx.com/support/answers/69780.html

 

 

Best Regards

Shabbir

0 Kudos