cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
382 Views
Registered: ‎03-21-2019

Device tree error while building with ADI bitfile

We have encountered the error
 
 
ERROR: device-tree-xilinx+gitAUTOINC+b7466bbeee-r0 do_compile: Function failed: do_compile (log file is located at /home/gtestbed/radio_sat/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/temp/log.do_compile.8673)
ERROR: Logfile of failure stored in: /home/gtestbed/radio_sat/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/temp/log.do_compile.8673
 
while following the below steps:
Step-1: We generated bitstream of the example ADRV9009 ZCu102 workspace successfully
Step-2: Created Petalinux project along with with HDF file and generated device-tree & other outputs successfully
Step-3: We tried doing petalinux build using the above outputs, which is generating error as attached.
 
Petalinux Version Used: 2018.3
Vivado Version used: 2018.3
Board Configured for: ZCU102 v1.1
 
Can you please guide us resolve this error..
0 Kudos
4 Replies
Moderator
Moderator
311 Views
Registered: ‎11-09-2015

Hi @manibenwa 

It would help if you could share the log file generated:

/home/gtestbed/radio_sat/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/temp/log.do_compile.8673


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
Moderator
Moderator
292 Views
Registered: ‎09-12-2007

If you share the HDF then we can debug this error, and possibly provide a fix. Otherwise the log that contains the error message so we can aid in debugging the issue

0 Kudos
Highlighted
Contributor
Contributor
254 Views
Registered: ‎03-21-2019

0 Kudos
Highlighted
Moderator
Moderator
239 Views
Registered: ‎09-12-2007

Ok, great. Can you make your post as slution then please. This will help others

0 Kudos