UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor schardt
Visitor
4,385 Views
Registered: ‎11-08-2007

EDK 10.1, Emaclite, Linux

Hi,

 

i use the Virte4FX12 Minimodule from Avnet/Memec with a smal EDK project to use uart and emaclite.  u-boot and linux works fine.

linux detect the emaclite (creates eth0 device) but it seems that the ethernet phy is not detected, because there is no arp entry in the arp-table of my host pc.

 

i compiled all phy-drivers in the linux kernel and try some other things, but the emac is still quiet.

 

i used the emaclite a few months ago with edk 8.2. in this project there was an additional ip-entry HardTemac. this is missing now.

 

is there a error in the board support package from avnet ? or is a linux driver missing ? 

 

regards

georg 

0 Kudos