UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor rrx
Visitor
199 Views
Registered: ‎04-03-2018

ERROR: [Hsi 55-1545] Problem running tcl command ::sw_cpu_cortexa53::generate

Jump to solution

We are in process of moving up from 2018.1 to 2018.3 .. the 2018.3 petalinux build fails as output shows below.   Any suggestions ?

 

 

| cmd is: xsct -sdx -nodisp /opt/workspace/2018.3/revA/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/dtgen.tcl -ws /opt/workspace/2018.3/revA/build/../components/plnx_workspace/device-tree -pname device-tree -rp /opt/workspace/2018.3/revA/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/git -processor psu_cortexa53_0 -hdf /opt/workspace/2018.3/revA/build/tmp/deploy/images/plnx-zynqmp/Xilinx-plnx-zynqmp.hdf -arch 64 -app "device-tree" -hdf_type hdf -yamlconf /opt/workspace/2018.3/revA/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/device-tree.yaml
| INFO: [Hsi 55-1698] elapsed time for repository loading 0 seconds
| hsi::open_hw_design: Time (s): cpu = 00:00:08 ; elapsed = 00:00:12 . Memory (MB): peak = 949.738 ; gain = 308.785 ; free physical = 102 ; free virtual = 3941
| invalid command name "+"
| ERROR: [Hsi 55-1545] Problem running tcl command ::sw_cpu_cortexa53::generate : invalid command name "+"
| while executing
| "+ set node_data [split $node ":"]"
| ("foreach" body line 3)
| invoked from within
| "foreach node ${dts_nodes} {
| if {[regexp $lu_node $node match]} {
| + set node_data [split $node ":"]
| + ..."
| ("foreach" body line 3)
| invoked from within
| "foreach dts_file ${dts_files} {
| set dts_nodes [get_all_tree_nodes $dts_file]
| foreach node ${dts_nodes} {
| if {[regexp $lu_node $node match]} {
| +..."
| (procedure "get_node_object" line 9)
| invoked from within
| "get_node_object / dummy.dtsi"
| invoked from within
| "create_dt_node -name cpus -objects [get_node_object / dummy.dtsi]"
| ("eval" body line 1)
| invoked from within
| "eval "create_dt_node ${cmd}""
| (procedure "add_or_get_dt_node" line 183)

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
154 Views
Registered: ‎09-12-2007

Re: ERROR: [Hsi 55-1545] Problem running tcl command ::sw_cpu_cortexa53::generate

Jump to solution

Can you pass on the HDF please.

 

Generally a good way to isolate these issues from the Petalinux is to try create the devicetree manually from the devicetree generator.

The flow for this can be seen in the wiki here

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841722/ZCU102+Image+creation+in+OSL+flow

See the devicetree section. 

 

However, if you pass on the HDF. I can take a quick look, and see what the problem is

0 Kudos
2 Replies
Moderator
Moderator
155 Views
Registered: ‎09-12-2007

Re: ERROR: [Hsi 55-1545] Problem running tcl command ::sw_cpu_cortexa53::generate

Jump to solution

Can you pass on the HDF please.

 

Generally a good way to isolate these issues from the Petalinux is to try create the devicetree manually from the devicetree generator.

The flow for this can be seen in the wiki here

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841722/ZCU102+Image+creation+in+OSL+flow

See the devicetree section. 

 

However, if you pass on the HDF. I can take a quick look, and see what the problem is

0 Kudos
Visitor rrx
Visitor
133 Views
Registered: ‎04-03-2018

Re: ERROR: [Hsi 55-1545] Problem running tcl command ::sw_cpu_cortexa53::generate

Jump to solution

thanks .. got patches ... so I am set ...

0 Kudos