UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor jchou.1992
Visitor
243 Views
Registered: ‎01-01-2019

Failed to build ug1209 design2 image.

Jump to solution

Hello:

 

I use Petalinux v2018.2 to build ug1209 design2 application for zcu102 board.

Due to I no  <petalinux_project>/project-spec/meta-user/recipes-dt/device-tree/files/system-top.dts in the linux project,

I use  <petalinux_project>/project-spec/meta-user/recipes-bsp/device-tree/files/system-user.dtsi to add following settings to enable DRM driver:

&xlnx_dp {
phy-names = "dp-phy0", "dp-phy1";
phys = <&lane1 5 0 3 27000000>, <&lane0 5 1 3 27000000>;
status = "okay";
};

 

After all settings, I build the image. then error message appear:

Error: /home/eyem5/user/xilinx-zcu102-2018.3/build/tmp/work/zcu102_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+f38738e568-r0/system-user.dtsi:4.1-9 Label or path xlnx_dp not found

 

How can I fix the error?

 

Thanks

Jimmy

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
158 Views
Registered: ‎06-27-2017

Re: Failed to build ug1209 design2 image.

Jump to solution

Hi @jchou.1992,

I don't think this will hang the boot process.

Best Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.
0 Kudos
4 Replies
Xilinx Employee
Xilinx Employee
216 Views
Registered: ‎06-27-2017

Re: Failed to build ug1209 design2 image.

Jump to solution

Hi @jchou.1992,

 

Could you please refer to below document which is latest one.

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_2/ug1209-embedded-design-tutorial.pdf

Best Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.
0 Kudos
Visitor jchou.1992
Visitor
191 Views
Registered: ‎01-01-2019

Re: Failed to build ug1209 design2 image.

Jump to solution

Hi Kranthi:

 

Build image successfully! but appears :

WARNING: petalinux-user-image-1.0-r0 do_rootfs: [log_check] petalinux-user-image: found 1 warning message in the logfile: [log_check] warning: %post(sysvinit-inittab-2.88dsf-r10.zcu102_zynqmp) scriptlet failed, exit status 1.

Does this warning make any trouble?

 

Thanks

Jimmy

0 Kudos
Xilinx Employee
Xilinx Employee
159 Views
Registered: ‎06-27-2017

Re: Failed to build ug1209 design2 image.

Jump to solution

Hi @jchou.1992,

I don't think this will hang the boot process.

Best Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.
0 Kudos
Visitor jchou.1992
Visitor
105 Views
Registered: ‎01-01-2019

Re: Failed to build ug1209 design2 image.

Jump to solution

Hello Kranthi:

 

After SD boot,  I login root in terminal,  following ug1209 2018.2 version. I key in:

# export DISPLAY=:0.0

# /usr/bin/Xorg -depth 16&

# tricube

 

No video output.

Error message: -sh Xorg: command  not found.

What wrong with me?

 

Thanks

Jimmy

 

 

 

 

0 Kudos