cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
150 Views
Registered: ‎02-11-2019

Getting program in NTP

hi,

I was trying to sync the gpsd and pps in ntp but think is it is not stable for more then 10 or 15 min. while checking i got to know the below error please find the error message and  give the solution for the same.

NOTE: I am using xc7z020 board and kernel version is 4.14.0.

Sep 29 12:25:04 picozed-zynq7 user.info kernel: pps pps1: new PPS source ttyUL33
Sep 29 12:25:04 picozed-zynq7 user.info kernel: pps pps1: source "/dev/ttyUL3" added
Sep 29 12:25:04 picozed-zynq7 daemon.notice ntpd[1193]: ntpd 4.2.8p13@1.3847-o Mon Aug 17 04:51:30 UTC 2020 (2): Starting
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1193]: Command line: ntpd -gN
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1195]: proto: precision = 2.148 usec (-19)
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1195]: basedate set to 2020-08-05
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1195]: gps base set to 2020-08-09 (week 2118)
Sep 29 12:25:04 picozed-zynq7 daemon.warn ntpd[1195]: restrict default: KOD does nothing without LIMITED.
Sep 29 12:25:04 picozed-zynq7 daemon.warn ntpd[1195]: restrict ::: KOD does nothing without LIMITED.
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1195]: Listen normally on 0 lo 127.0.0.1:123
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1195]: Listen normally on 1 lo [::1]:123
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1195]: Listening on routing socket on fd #18 for interface updates
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1195]: kernel reports TIME_ERROR: 0x4041: Clock Unsynchronized
Sep 29 12:25:04 picozed-zynq7 daemon.info ntpd[1195]: kernel reports TIME_ERROR: 0x4041: Clock Unsynchronized
Sep 29 12:30:27 picozed-zynq7 daemon.info ntpd[1195]: kernel reports TIME_ERROR: 0x4041: Clock Unsynchronized

 

 

Thanks & Regards

Naresh

0 Kudos
Reply
0 Replies