cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer
Observer
5,699 Views
Registered: ‎02-16-2015

How to use the custom user module in root petalinux 2014.4

Jump to solution

I have precompiled my linux module like the following pdf and it is built when I build the kernel. Once I boot the kernel I am having trouble understanding how to use the .ko driver that was prebuilt in the kernel.

 

The .ko driver is no where in the root directory but was built and installed to the rootfs.

 

lsmod shows nothing but I think that is correct. 

 

 

[root@localhost mydma]# find ../../../ -name "xfifo*"
../../../build/linux/rootfs/modules/xfifo_dma
../../../build/linux/rootfs/modules/xfifo_dma/xfifo_dma.o
../../../build/linux/rootfs/modules/xfifo_dma/xfifo_dma.mod.c
../../../build/linux/rootfs/modules/xfifo_dma/xfifo_dma.c
../../../build/linux/rootfs/modules/xfifo_dma/xfifo_dma.mod.o
../../../build/linux/rootfs/modules/xfifo_dma/xfifo_dma.ko
../../../build/linux/rootfs/modules/xfifo_dma/.tmp_versions/xfifo_dma.mod
../../../build/linux/rootfs/targetroot/lib/modules/3.17.0-xilinx/extra/xfifo_dma.ko
../../../components/modules/xfifo_dma
../../../components/modules/xfifo_dma/xfifo_dma.c

 

root@Xilinx-ZC706-2014_4:/# find / -name "*xfifo*"
root@Xilinx-ZC706-2014_4:/#

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Scholar
Scholar
9,722 Views
Registered: ‎09-05-2011

Re: How to use the custom user module in root petalinux 2014.4

Jump to solution
The procedure to include pre-built modules into PetaLinux root file system is mentioned on page 63 of the following guide
http://www.xilinx.com/support/documentation/sw_manuals/petalinux2014_4/ug1144-petalinux-tools-reference-guide.pdf

did you use the same method?

View solution in original post

0 Kudos
3 Replies
Xilinx Employee
Xilinx Employee
5,659 Views
Registered: ‎07-01-2010

Re: How to use the custom user module in root petalinux 2014.4

Jump to solution
The below link provides details on how to add kernel modules to Petalinux root file system.
http://www.xilinx.com/support/answers/55997.html

Regards,
Achutha
---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------
0 Kudos
Highlighted
Scholar
Scholar
9,723 Views
Registered: ‎09-05-2011

Re: How to use the custom user module in root petalinux 2014.4

Jump to solution
The procedure to include pre-built modules into PetaLinux root file system is mentioned on page 63 of the following guide
http://www.xilinx.com/support/documentation/sw_manuals/petalinux2014_4/ug1144-petalinux-tools-reference-guide.pdf

did you use the same method?

View solution in original post

0 Kudos
Highlighted
Observer
Observer
5,560 Views
Registered: ‎02-16-2015

Re: How to use the custom user module in root petalinux 2014.4

Jump to solution

I am. I just got my modules to load on the board and I am not sure what I did. I am using the bsp with my hw description imported to the project.

 

Thanks for the response!

Kevin

0 Kudos