cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
koju155
Visitor
Visitor
3,593 Views
Registered: ‎11-02-2016

Interface for own Layers in PetaLinux

Jump to solution

Is there an interface for adding custom layers to a PetaLinux build?

 

I mean I can probably add a layer in the build/conf/bblayers.conf, but is this modification persistent since there is a comment, that thie bblayers.conf is not supposed to be edited.

 

0 Kudos
1 Solution

Accepted Solutions
jeffdaq
Explorer
Explorer
5,699 Views
Registered: ‎11-22-2015

 

The reason you don't edit is because it is generated.  You need to modify the bblayers.conf.sample in your distribution.  I created my own bsp and dist and don't use the petalinux dist.  Modifying the petalinux dist isn't a very good solution until you are the only one working on everything and only build in one area.  I created my own dist from the petalinux dist that I can modify and easily share.

 

jeff

 

View solution in original post

1 Reply
jeffdaq
Explorer
Explorer
5,700 Views
Registered: ‎11-22-2015

 

The reason you don't edit is because it is generated.  You need to modify the bblayers.conf.sample in your distribution.  I created my own bsp and dist and don't use the petalinux dist.  Modifying the petalinux dist isn't a very good solution until you are the only one working on everything and only build in one area.  I created my own dist from the petalinux dist that I can modify and easily share.

 

jeff

 

View solution in original post