cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
4,357 Views
Registered: ‎01-08-2015

Linux compilation error for ML507 FPGA board

Hi,

 

I am trying to have linux OS in ML507 board. For this,  I have followed the process from http://www.wiki.xilinx.com/PowerPC+Linux .

I have install eldk 4.2 to have ppc_4xx-gcc for compilation. During kernel compilation, I am getting below errors,

===================================

  BOOTCC  arch/powerpc/boot/treeboot-akebono.o
{standard input}: Assembler messages:
{standard input}:218: Error: Unrecognized opcode: `mfdcrx'
{standard input}:401: Error: Unrecognized opcode: `mtdcrx'
{standard input}:408: Error: Unrecognized opcode: `mfdcrx'
{standard input}:416: Error: Unrecognized opcode: `mtdcrx'
make[1]: *** [arch/powerpc/boot/treeboot-akebono.o] Error 1
make: *** [simpleImage.initrd.virtex440-ml507] Error 2

 

===================================

 

Compilation Steps are:

1) CROSS_COMPILE = ppc_4xx-

2) make ARCH=powerpc 44x/virtex5_defconfig

3) make ARCH=powerpc simpleImage.initrd.virtex440-ml507

 

Please help me on this issue ?

 

Thanks,

Rahul Bhansali

0 Kudos
0 Replies