UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
4,336 Views
Registered: ‎01-08-2015

Linux compilation error for ML507 FPGA board

Hi,

 

I am trying to have linux OS in ML507 board. For this,  I have followed the process from http://www.wiki.xilinx.com/PowerPC+Linux .

I have install eldk 4.2 to have ppc_4xx-gcc for compilation. During kernel compilation, I am getting below errors,

===================================

  BOOTCC  arch/powerpc/boot/treeboot-akebono.o
{standard input}: Assembler messages:
{standard input}:218: Error: Unrecognized opcode: `mfdcrx'
{standard input}:401: Error: Unrecognized opcode: `mtdcrx'
{standard input}:408: Error: Unrecognized opcode: `mfdcrx'
{standard input}:416: Error: Unrecognized opcode: `mtdcrx'
make[1]: *** [arch/powerpc/boot/treeboot-akebono.o] Error 1
make: *** [simpleImage.initrd.virtex440-ml507] Error 2

 

===================================

 

Compilation Steps are:

1) CROSS_COMPILE = ppc_4xx-

2) make ARCH=powerpc 44x/virtex5_defconfig

3) make ARCH=powerpc simpleImage.initrd.virtex440-ml507

 

Please help me on this issue ?

 

Thanks,

Rahul Bhansali

0 Kudos