cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Observer
Observer
2,775 Views
Registered: ‎12-12-2007

Linux on ML510

Hi,

 

I am trying to port Linux on ML510. I am using EDK 10.1.3 and dts and xilinx linux kernel. I have ported successfully linux on ML507 and now I trying with the same system (without PCI) to port it on ML510. The problem is that when I download the linux image (with xmd) the program counter is not set to the address of the boot sector of linux kernel (as it happens with ML507), so linux doesn't boot. Any ideas what may cause this problem?

 

Thanks in advance,

Nikos

 

P.S I have attached my mhs file in case someone wants to check it.

0 Kudos
Reply
1 Reply
Xilinx Employee
Xilinx Employee
2,769 Views
Registered: ‎09-10-2008

Take a look at http://xilinx.wikidot.com/powerpc-ml510.

 

We don't do much with the board anymore so this is most the info.

 

I would suggest using a known system that works, then look at you deltas.

 

Thanks.

0 Kudos
Reply