cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
watari
Professor
Professor
2,272 Views
Registered: ‎06-16-2013

Looking for Ultra96 BSP (PetaLinux 2018.3)

Jump to solution

Hi all

 

I'm looking for Ultra96 BSP for PetaLinux 2018.3.

I can find ZED BSP in download site of Xilinx. However I can not find Ultra96 BSP.

 

Where is Ultra96 BSP ?

Perhaps, do I need to post this on Ultra96 community ?

 

I think that what Xilinx prepare Ultra96 BSP or point out download URL are suitable and helpful for community member...

 

Best regards,

 

 

0 Kudos
1 Solution

Accepted Solutions
fft4096
Observer
Observer
1,558 Views
Registered: ‎06-07-2018

Hi, Just came across this post, better late than never!

 

You can glean a 2018.3 bsp for U96 V1 from here:  https://github.com/Avnet/Ultra96-PYNQ

 

Make sure you apply the fix mentioned in the notes to remove the mipi hw design when you are importing your own hw design!

 

 

View solution in original post

0 Kudos
4 Replies
sandeepg
Moderator
Moderator
2,245 Views
Registered: ‎04-24-2017

Hi @watari,

Avent will be owning all the 2018.3 Ultra96 PetaLinux BSP so you don't find in Xilinx website. You need to check with Avnet forums/FAE.

Thanks,
Sandeep
PetaLinux Yocto | Embedded SW Support

---------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.
---------------------------------------------------------------------------
0 Kudos
andycap
Observer
Observer
2,094 Views
Registered: ‎09-18-2017

H Sandeep,

This is unfortunate as Avnet will take forever to do anything.

 

I'm guessing the best way is to revert back to 2018.2, is there a way of converting Vivido projects back from 2018.3 to 2018.2?

 

Many thanks

 

Andy

0 Kudos
fft4096
Observer
Observer
1,559 Views
Registered: ‎06-07-2018

Hi, Just came across this post, better late than never!

 

You can glean a 2018.3 bsp for U96 V1 from here:  https://github.com/Avnet/Ultra96-PYNQ

 

Make sure you apply the fix mentioned in the notes to remove the mipi hw design when you are importing your own hw design!

 

 

View solution in original post

0 Kudos
watari
Professor
Professor
1,553 Views
Registered: ‎06-16-2013

Hi @fft4096 

 

Thank you for your infmration.

Git it.

 

Best regards,

0 Kudos