cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
379 Views
Registered: ‎05-07-2018

Menuconfig GUI doesn't show up when "petalinux-config -c kernel" command run

Hello,

I want to implement Zynq Ultrascale MPSoc VCU TRD 2018.1 Design Module-2 application on Zcu106 Board. I installed petalinux and tftp server then I started to apply these steps:

% cd $TRD_HOME/apu/vcu_petalinux_bsp

% petalinux-create -t project -s xilinx-sdirx-vcu-sditx-trd-zcu106-zu7-v2018.1-final.bsp

% cd xilinx-sdirx-vcu-sditx-trd-zcu106-zu7-v2018.1-final

% cp project-spec/meta-user/recipes-bsp/device-tree/files/zcu106-vcu-dm2.dtsi project-spec/meta-user/recipes-bsp/device-tree/files/system-user.dtsi

% petalinux-config --get-hw-description=$TRD_HOME/pl/pre-built/sdirx_vcu

% petalinux-build

But when I finished and run "petalinux-build" command I got some warnings and error as:

ExpansionError during parsing /components/yocto/source/aarch64/layers/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2018.1.bb

However I couldn't find any useful solution on internet and I decided to do some changes in Menuconfig GUI according to this link:

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842008/PetaLinux+kernel+and+application+build+steps+in+configuring+ZU+MPSoC+board+as+PS+PCIe+End+Point+and+Root+Port

"petalinux-config" part was OK but when I run "petalinux-config -c kernel" command in second step, GUI didn't show up. I searched on internet and applied some advices like editing local.conf file and changes OE_TERMINAL = "xterm" or changing terminal size but they didn't work and now "petalinux-config" command is not working anymore.(GUI doesn't show up)

I would really appreciate any help.

Thanks in advance.

0 Kudos
1 Reply
Highlighted
Contributor
Contributor
318 Views
Registered: ‎05-07-2018

Re: Menuconfig GUI doesn't show up when "petalinux-config -c kernel" command run

When I reinstall petalinux the error disappear. Maybe I missed something when I install it.

0 Kudos