UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
8,185 Views
Registered: ‎03-26-2010

Petalinux 2016.4 u-boot doesn't compile

Jump to solution

Hi all,

 

I'm using Petalinux 2016.4/Vivado 2016.4 on Ubuntu 16.04, having problems compiling u-boot. I run these commands in this order:

petalinux-build -c u-boot -x clean
petalinux-build -x clean
petalinux-build -c u-boot

Get this error when building package u-boot-xlnx_2016.07.bb, file path given in my Petalinux-2016.4/build/build/log file, pointing to Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/temp/log.do_compile.23690:

 

...

NOTE: recipe device-tree-generation-xilinx+gitAUTOINC+11f81055d1-r0: task do_package_write_rpm_setscene: Succeeded
NOTE: Executing RunQueue Tasks
NOTE: Running task 952 of 965 (ID: 6, /opt/Xilinx/petalinux-v2016.4-final/components/yocto/source/arm/layers/meta-xilinx/recipes-bsp/u-boot/u-boot-xlnx_2016.07.bb, do_compile)
NOTE: recipe u-boot-xlnx-v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0: task do_compile: Started
ERROR: u-boot-xlnx-v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0 do_compile: oe_runmake failed
ERROR: u-boot-xlnx-v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0 do_compile: Function failed: do_compile (log file is located at /home/vadim/Work/Aldec_TySOM_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/temp/log.do_compile.23690)
ERROR: Logfile of failure stored in: /home/vadim/Work/Aldec_TySOM_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/temp/log.do_compile.23690
NOTE: recipe u-boot-xlnx-v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0: task do_compile: Failed
ERROR: Task 6 (/opt/Xilinx/petalinux-v2016.4-final/components/yocto/source/arm/layers/meta-xilinx/recipes-bsp/u-boot/u-boot-xlnx_2016.07.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 955 tasks of which 17 didn't need to be rerun and 1 failed.
ERROR: Failed to build u-boot

How should this be fixed?

0 Kudos
1 Solution

Accepted Solutions
Explorer
Explorer
11,637 Views
Registered: ‎03-26-2010

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

@shabbirk:

 

Did some more testing.

 

With CROSS_COMPILE set to aarch64-linux-gnu- or aarch64-none-elf- I had all of Petalinux 2016.4 build fine for Zynq-7000, the ZC706_config target being used for u-boot. With the Linaro or CodeSourcery values of arm-xilinx-linux-gnueabi- or arm-linux-gnueabihf- u-boot does not build.

 

Also, in Petalinux 2016.4, for some reason I can't do a petalinux-build -c u-boot if petalinux-build hasn't been called successfully by itself first. This is a departure from how Petalinux 2016.2 and older worked.

 

Shabbir, thanks for sticking with this!

0 Kudos
12 Replies
Explorer
Explorer
8,138 Views
Registered: ‎03-26-2010

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

No one had any problems with Petalinux u-boot for 2016.4?

0 Kudos
Moderator
Moderator
8,105 Views
Registered: ‎12-04-2016

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

Hi

 

Could you please share this log file:

home/vadim/Work/Aldec_TySOM_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/temp/log.do_compile.23690

 

 

 

0 Kudos
Explorer
Explorer
8,102 Views
Registered: ‎03-26-2010

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

Sure - the log file name changed in a new compile, but the error is the same. I attached it, but here are the last few lines before error:

/home/Bob/Work/Alice_HW_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/git/include/configs/platform-auto.h:196:61: warning: backslash and newline separated by space
  "default_bootcmd=run cp_kernel2ram && bootm ${netstart}\0" \ 
                                                             ^
  arm-linux-gnueabihf-ld.bfd     -r -o examples/standalone/libstubs.o examples/standalone/stubs.o
  arm-linux-gnueabihf-ld.bfd   -g -Ttext 0xc100000 -o examples/standalone/hello_world -e hello_world examples/standalone/hello_world.o examples/standalone/libstubs.o arch/arm/lib/lib.a
  arm-linux-gnueabihf-objcopy -O srec  examples/standalone/hello_world examples/standalone/hello_world.srec
  arm-linux-gnueabihf-objcopy -O binary  examples/standalone/hello_world examples/standalone/hello_world.bin
  arm-linux-gnueabihf-ld.bfd   -pie  --gc-sections -Bstatic -Ttext 0x00400000 -o u-boot -T u-boot.lds arch/arm/cpu/armv7/start.o --start-group  arch/arm/cpu/built-in.o  arch/arm/cpu/armv7/built-in.o  arch/arm/lib/built-in.o  arch/arm/mach-zynq/built-in.o  board/xilinx/zynq/built-in.o  cmd/built-in.o  common/built-in.o  disk/built-in.o  drivers/built-in.o  drivers/dma/built-in.o  drivers/gpio/built-in.o  drivers/i2c/built-in.o  drivers/mmc/built-in.o  drivers/mtd/built-in.o  drivers/mtd/onenand/built-in.o  drivers/mtd/spi/built-in.o  drivers/net/built-in.o  drivers/net/phy/built-in.o  drivers/pci/built-in.o  drivers/power/built-in.o  drivers/power/battery/built-in.o  drivers/power/fuel_gauge/built-in.o  drivers/power/mfd/built-in.o  drivers/power/pmic/built-in.o  drivers/power/regulator/built-in.o  drivers/serial/built-in.o  drivers/spi/built-in.o  drivers/usb/common/built-in.o  drivers/usb/dwc3/built-in.o  drivers/usb/emul/built-in.o  drivers/usb/eth/built-in.o  drivers/usb/gadget/built-in.o  drivers/usb/gadget/udc/built-in.o  drivers/usb/host/built-in.o  drivers/usb/musb-new/built-in.o  drivers/usb/musb/built-in.o  drivers/usb/phy/built-in.o  drivers/usb/ulpi/built-in.o  dts/built-in.o  fs/built-in.o  lib/built-in.o  net/built-in.o  test/built-in.o  test/dm/built-in.o --end-group arch/arm/lib/eabi_compat.o  arch/arm/lib/lib.a -Map u-boot.map
cmd/built-in.o: In function `print_cpu_list':
/home/Bob/Work/Alice_HW_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/git/cmd/cpu.c:38: undefined reference to `cpu_get_desc'
/home/Bob/Work/Alice_HW_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/git/cmd/cpu.c:43: undefined reference to `cpu_get_info'
arm-linux-gnueabihf-ld.bfd: error: required section '.rel.plt' not found in the linker script
arm-linux-gnueabihf-ld.bfd: final link failed: Invalid operation
/home/Bob/Work/Alice_HW_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/git/Makefile:1187: recipe for target 'u-boot' failed
make[1]: *** [u-boot] Error 1
make[1]: Leaving directory '/home/Bob/Work/Alice_HW_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/build'
Makefile:150: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
make: Leaving directory '/home/Bob/Work/Alice_HW_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/git'
ERROR: oe_runmake failed
ERROR: Function failed: do_compile (log file is located at /home/Bob/Work/Alice_HW_Repo/Petalinux-2016.4/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/u-boot-xlnx/v2016.07-xilinx+gitAUTOINC+0b94ce5ed4-r0/temp/log.do_compile.1908)
0 Kudos
Moderator
Moderator
8,097 Views
Registered: ‎12-04-2016

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

Hi

 

Are you seeing this error, much related to toolchain:

arm-linux-gnueabihf-ld.bfd: error: required section '.rel.plt' not found in the linker script

Might need to clean and rebuild again.

 

Use these commands:

petalinux-build -c clean

petalinux-build -x mrproper

 

 

Best Regards

Shabbir 

0 Kudos
Explorer
Explorer
8,094 Views
Registered: ‎03-26-2010

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

Thanks for taking a look.

 

Yup, ran that - saw something similar in a much older forum post here: https://forums.xilinx.com/t5/Embedded-Linux/Error-building-u-boot/td-p/365783

 

Didn't help unfortunately...

0 Kudos
Moderator
Moderator
8,090 Views
Registered: ‎12-04-2016

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

Ok then try exporting other tool chain, something like this:

export CROSS_COMPILE=aarch64-none-elf-

 

And then build

0 Kudos
Explorer
Explorer
7,878 Views
Registered: ‎03-26-2010

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

This is for Zynq-7000, should I do this instead?

export CROSS_COMPILE=arm-none-linux-gnueabi-

 

0 Kudos
Explorer
Explorer
8,081 Views
Registered: ‎03-26-2010

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

I am using Zynq-7000, should I do this instead?

export CROSS_COMPILE=arm-none-linux-gnueabi-
0 Kudos
Moderator
Moderator
8,057 Views
Registered: ‎12-04-2016

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

Hi

 

You can use aarch64 toolchain for zynq also. FYI, petalinux -2016.4 has this toolchain. Atleast I used to build with this toolchain for zynq7000

 

 

Best Regards

Shabbir

0 Kudos
Explorer
Explorer
4,603 Views
Registered: ‎03-26-2010

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

I changed the environment to the aarch64 toolchain as you suggested, then did:

petalinux-build -c u-boot -x cleanall

petalinux-build -x mrproper

petalinux-build -c u-boot

 

However, my error message still has the old cross compiler for Linaro: arm-linux-gnueabihf- in it. Is there something else to do to clean that up?

0 Kudos
Moderator
Moderator
4,520 Views
Registered: ‎12-04-2016

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

Hi 

 

I would suggest after export toolchain, do petalinux-build -c clean & petalinux-build -x mrproper.

 

Dont give petalinux-build -c u-boot, instead, just give petalinux-build

 

 

BR
Shabbir

0 Kudos
Explorer
Explorer
11,638 Views
Registered: ‎03-26-2010

Re: Petalinux 2016.4 u-boot doesn't compile

Jump to solution

@shabbirk:

 

Did some more testing.

 

With CROSS_COMPILE set to aarch64-linux-gnu- or aarch64-none-elf- I had all of Petalinux 2016.4 build fine for Zynq-7000, the ZC706_config target being used for u-boot. With the Linaro or CodeSourcery values of arm-xilinx-linux-gnueabi- or arm-linux-gnueabihf- u-boot does not build.

 

Also, in Petalinux 2016.4, for some reason I can't do a petalinux-build -c u-boot if petalinux-build hasn't been called successfully by itself first. This is a departure from how Petalinux 2016.2 and older worked.

 

Shabbir, thanks for sticking with this!

0 Kudos