UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
216 Views
Registered: ‎04-10-2019

Petalinux PS-PL connectiion

I successfully booted ubuntu on a zynq processor (pynq-z1 board) so now I have it on the PS also I developed an IP on HLS and exported it to vivado and created my block diagram .

My problem is that I want to load the IP on the programming logic (PL) with petalinux and connect establish a connection with the PS to receive inputs and produce needed outputs but I failed to find out how to do so .

please note that I am not using any external hardware ex : buttons,LEDs,.... so the famous LED tutorial didn't help me understanding how to do it with my IP .

I have no experience with device trees or fstbl or these things so any step by step help would be appreciated and thank you .

Mohamed Taher
0 Kudos
1 Reply
Adventurer
Adventurer
179 Views
Registered: ‎07-20-2017

Re: Petalinux PS-PL connectiion

Refer to these : https://forums.xilinx.com/t5/Vivado-High-Level-Synthesis-HLS/HLS-2017-2-Linux-drivers-for-my-exported-IP/td-p/812877

https://forums.xilinx.com/t5/Vivado-High-Level-Synthesis-HLS/linux-drivers-for-my-HLS-ip/td-p/909425
https://logictronix.com/our-resources/petalinux-development/
Regards, abhidan@logictronix.com
Please mark the Answer as "Accept as solution" if information provided solves your query. Give Kudos if you think it was helpful and reply oriented.
0 Kudos