We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Showing results for 
Search instead for 
Did you mean: 
Observer mdedonato
Registered: ‎03-01-2016

Petalinux will not wake-up from sleep

When putting the processor into memory sleep mode as follows:


zynq> rtcwake -m mem -s 10
wakeup from "mem" at Sat Jul 29 13:25:03 2017
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.012 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 9.482 msecs
PM: suspend devices took 0.010 seconds
PM: late suspend of devices complete after 0.657 msecs
PM: noirq suspend of devices complete after 0.731 msecs
Dsabling non-boot CPUs ...
CPU1: shutdown


 The system never wakes back up.  The RTC wake-up interrupt comes from the FPGA fabric, and is triggering correctly, the system recognizes it when it is running.  I am using Petalinux 2015.4.


Here is my device tree entry:


	rtc@6F {
 		compatible = "microchip,mcp7940x";
		reg = <0x6F>;
		interrupt-parent = <&intc>;
		interrupts = <0 30 4>;
		interrupt-names	= "wakeup";


Am I missing something?  


Tags (3)
0 Kudos
1 Reply
Observer mdedonato
Registered: ‎03-01-2016

Re: Petalinux will not wake-up from sleep

A quick update, I am able to setup the board to be woken up using input from the UART, therefore I know that the sleep/wake is working.  However, no matter what I do, I cannot get the board to wakeup on the RTC interrupt.  


Could it have something to do with the interrupt coming from the FPGA fabric?

0 Kudos