cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
yannantian198656
Observer
Observer
199 Views
Registered: ‎04-27-2018

Petalinux2019.2 config components fail

I am use Petalinux2019.2 to develop on zcu102 board.

And I follow UG1144 setting external local sources, include linux-xlnx, u-boot-xlnx. My external local sources's location is <project root dir>/components/ext_sources. And I run "petalinux-config" to configure their path likes "${TOPDIR}/../components/ext_sources/*.

It works well when i build the project. However, when i run "petalinux-config -c <component>", it occurs a error "--no-extract is specified and source path ..../build/components/ext_sources/linux-xlnx does not exist or is not directory". From the error message, i can see the ".." in the path is ignored by the tool. It should be "build/../components/ext_sources/*", but is shown as "build/components/ext_sources/*" in the error message.

Thanks for any sugesstion.

0 Kudos
1 Reply
ashokkp
Visitor
Visitor
150 Views
Registered: ‎11-02-2020

Just move meta packages in project-spec/ folder. Then add in config step ${proot}/project-spec/<meta-pkg>. Once it is successful then go to project-spec/meta-user/conf/user-rootfsconfig and add

 

CONFIG_<meta-pkg>

Now build using "petalinux-build"

0 Kudos