01-10-2011 02:19 AM
I aleady done porting on ML507 , but doing in ML410 .But whatever procedure given in different for ML410,every body used Montavista.I m using virtex4-ML410 board on RHEL5 system with Xilinx12.2.I taken linux_2_6 on OS support in Xilinx and then generate lib. and BSP.the xparameters_ml410.h generated.I copied in linux_kernel_directory (ppc/boot/platforms/xparameters/).I m taking linux-2.6.10 linux kernel.I created Image also.But whenever I run zImage.initrd.elf it shows error ---
cable locked --trying
Plz someboby help me where I m wrong.
Is the Image I made is wrong or some other problem.
Thanks , Plz
01-11-2011 01:15 AM
Ya I tried that,its shows like this -
Cable locked.........Keep trying
Is there anything wrong with the ML410 Image.
01-11-2011 07:59 AM
I don't think that it's an image problem - it's most likely a cable problem. Is there another software tool using the cable? Impact or chipscope? Are you using windows or linux? Have you tried unplugging the cable?
01-11-2011 10:32 PM
Thanks sir for quick response.
I done image creation work on RHEL5 system with Xilinx 12.2, linux_2_6 as OS Platfort Support.
I am running that application in windows Xilinx 9.1,first I m downloading download.bit using Impact tool after that I m running zImage.initrd.elf in XMD.I also remove the cable but nothing happened.
I m taking kernel 2.6.10 .I download.bit I m taking default:ppc405_0_bootloop as Mark Initial BRAM as my zImage.initrd.elf will be in different folder of linux kernel.So .bit will not display anything on Hyperterminal.Similar work I done for ML507 and it was working.
Plz help me to correct this problem.Is I m taking wrong kernel version?or what can be this issue?