cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
coreyhahn
Contributor
Contributor
379 Views
Registered: ‎09-13-2018

SDFEC in petalinux 2019.2 downloads directory

Went to build petalinux for a VCU111 board using the default BSP from Xilinx.  I am in an environment with no access to the internet for build.  I downloaded the sstate  for aarch64 and downloads.  The linux-examples with sd-fec drivers are not in the tar file.  https://github.com/Xilinx/linux-examples

I get this error.
ERROR: sdfec-1.1-r0 do_fetch: Network access disabled through BB_NO_NETWORK (or set indirectly due to use of BB_FETCH_PREMIRRORONLY) but access requested with command LANG=C git -c core.fsyncobjectfiles=0 clone --bare --mirror https://github.com/Xilinx/linux-examples.git /blahblah/xilinx-zcu111-2019.2/build/downloads/git2/github.com.Xilinx.linux-examples.git --progress (for url git://github.com/Xilinx/linux-examples.git;protocol=https;nobranch=1)
ERROR: sdfec-1.1-r0 do_fetch: Function failed: base_do_fetch
ERROR: Logfile of failure stored in: /blahblah/xilinx-zcu111-2019.2/build/tmp/work/aarch64-xilinx-linux/sdfec/1.1-r0/temp/log.do_fetch.14352
ERROR: Task (/blah/petalinux_2019.2/components/yocto/source/aarch64/layers/meta-petalinux/recipes-apps/sdfec/sdfec_1.1.bb:do_fetch) failed with exit code '1'

 

Was it just forgotten?  What is the best way to reinsert it in my environment.

If i config the rootfs to drop sdfec support,  everything builds as expected.

 

0 Kudos
0 Replies