UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor asuarez
Visitor
785 Views
Registered: ‎02-14-2018

SDIO WiFi Module Recommendations

Jump to solution

Hey everyone,

 

I'm planning on adding WiFi to my ZC-702 board. Preferably an SDIO WiFi module since I running low on pins and would like something with FCC approval. Does anyone have any recommendations for modules that have worked for them or just have a good feeling about?

 

I'm using  Petalinux 2017.4 with kernel version 4.9.0.

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Adventurer
Adventurer
917 Views
Registered: ‎05-26-2017

Re: SDIO WiFi Module Recommendations

Jump to solution

Ti Wilink 8 parts work well for us

2 Replies
Adventurer
Adventurer
772 Views
Registered: ‎07-05-2017

Re: SDIO WiFi Module Recommendations

Jump to solution

Hi Asuarez,

 

I used an SDIO based Wifi module from Avnet PBA-TD1MPD-1-01-00 and incorporated it in my design based on Zedbaoard which uses the zynq XC7Z020-1CLG484C FPGA part.

 

The link to the WiFi reference design and bsp is "www.zedboard.org/support/design/1521/11" They have both 2017.3 and 2017.4 bsps. I used the 2017.3 in my design.

Adventurer
Adventurer
918 Views
Registered: ‎05-26-2017

Re: SDIO WiFi Module Recommendations

Jump to solution

Ti Wilink 8 parts work well for us