UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
92 Views
Registered: ‎02-03-2016

U-Boot failure in QSPI boot

Hello,

I am trying to create a valid QSPI boot process on my board.

I am using Petalinux 2018.2 tools

I am downloading BOOT.BIN to offset 0 using program_flash utility

program_flash.bat -f BOOT.BIN -fsbl zynqmp_fsbl.elf -offset 0x000000 -flash_type qspi_dual_parallel -cable type xilinx_tcf url tcp:localhost:3121

 

This goes well, until I try to boot OS image (even using netboot). The image boots OK, but when I try to restart the board - I get the following error:

initcall sequence 000000000808f558 failed at call 0000000008017b44 (err=-2)
### ERROR ### Please RESET the board ###

This is an error message coming from u-boot, but I did not succeed to understand why it happens.

 

Your help is appreciated.

Alex

0 Kudos