UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Newbie ramesha.a
Newbie
6,826 Views
Registered: ‎11-17-2015

Uboot development for custom Virtex5 130FXT board

I have uboot working in Virtex 5 FX100T (having 256MB DDR, 256MB Software Flash, 16MB Platform Flash, Ethernet ...etc). I want port this uboot for Virtex 5 FX130T (having 256MB DDR, 64MB Software Flash, 16MB Platform Flash, Ethernet ...etc). The new uboot image used to boot Virtex 5 FX130T based board display following errornious message:

 

U-Boot 1.3.4-00327-ge094f24-dirty (Nov 17 2015 - 18:19:00)

CPU:   Xilinx PowerPC 440 UNKNOWN (PVR=7ff21912) at 250 MHz
       32 kB I-Cache 32 kB D-Cache



DRAM:  256 MB
Platform FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
*** failed ***
Spansion FLASH: 64 MB
*** Warning - bad CRC, using default environmen

 

Kindly tell me how to rectify the issue.

 

with regards

0 Kudos