UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor axmei
Visitor
249 Views
Registered: ‎05-04-2018

Unable to download dt_overaly.tcl

0 Kudos
3 Replies
Highlighted
Moderator
Moderator
181 Views
Registered: ‎11-09-2015

Re: Unable to download dt_overaly.tcl

Hi @axmei,

I tested it and it is working for me. Can you try again? Maybe right click on the link and click save link as.

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
82 Views
Registered: ‎09-10-2018

Re: Unable to download dt_overaly.tcl

The link does not work for me either..  Might it be some premissions about being inside xilinx and outside ?  (is it published to the world)

 

 

0 Kudos
Moderator
Moderator
71 Views
Registered: ‎09-12-2007

Re: Unable to download dt_overaly.tcl

The file is seen below:

set hdf <path to your hdf file>.hdf

set hw [hsi::open_hw_design $hdf]
hsi::set_repo_path ./repo
hsi::create_sw_design sw1 -proc psu_cortexa53_0 -os device_tree
hsi::set_property CONFIG.dt_overlay true [hsi::get_os]
hsi::generate_bsp -dir dtg_out
hsi::close_hw_design $hw

 

You can add this to a TCL, and source from XSCT.

 

I also have attached a helper_proc.tcl that you can use to create the pl.dtbo, and the bit.bin file needed when using overlays.

Source this in XSCT, and use the procs below to create the proc below:

  • generate_dts <path to hdf>.hdf
    bit2bin <path to bit>.bit