UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Voyager
Voyager
238 Views
Registered: ‎09-14-2016

Update U-boot from 2017.1 to 2019.1

Hello,

For one of my client I have to update u-boot from 2017.1 to 2019.1, compilation is fine but I don't any output on the UART anymore,

Any advice to debug u-boot UART? There were probably many changes in 2 years... :(

For info It's a custom board based on Zynq7000 and I use Xilinx SDK 2017.4 to flash trought JTAG.

Cheers,

Trigger

0 Kudos
5 Replies
Moderator
Moderator
159 Views
Registered: ‎02-07-2018

Re: Update U-boot from 2017.1 to 2019.1

HI @trigger 

Are your getting any fsbl logs. if so please share that logs.

Note: Please make sure vivado & petalinux should be same version. It should not use both diffrent versions.

 

Thanks & regards

Aravind

0 Kudos
Moderator
Moderator
133 Views
Registered: ‎09-12-2007

Re: Update U-boot from 2017.1 to 2019.1

how did you migrate, did you just get the 2019.2 brach of u-boot and build? Can you share the the defconfig?

0 Kudos
Voyager
Voyager
125 Views
Registered: ‎09-14-2016

Re: Update U-boot from 2017.1 to 2019.1

Hello @stephenm @aravindb 

You are right, my post need to be clearer.

For security reason I have to update u-boot from 2017.1 to 2019.1.

@aravindb I don't use petalinux, I made all with meta-xilinx and Yocto (zeus branch)

@stephenm for a first step I using picozed-defconfig file

No error during Nand flash process.

Do you think I have to change something inside the device-tree(dts) ?

Cheers,

Trigger

0 Kudos
Moderator
Moderator
122 Views
Registered: ‎09-12-2007

Re: Update U-boot from 2017.1 to 2019.1

Can you provide the dt used, and the defconfig?

0 Kudos
Voyager
Voyager
117 Views
Registered: ‎09-14-2016

Re: Update U-boot from 2017.1 to 2019.1

@stephenm  done :)

dts :  https://pastebin.com/jj37phh2

old defconfig (works withe 2017.2) : https://pastebin.com/0AzxSbNT 

new defconfig ( 2019.1) : https://pastebin.com/G0akurst

Note: Stars in files are here just to hide our board name.

0 Kudos