UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
276 Views
Registered: ‎04-08-2019

Upload .bit file to FPGA from APU running Petalinux 2018.3

Jump to solution

Hello,

I want to upload a .bit file I have create from Vivado 2018.3 into ZUC102 FPGA. The problem is that I want to do that from APU that running Petalinux 2018.3 on the same board but I don't know if it's possible because I haven't find any documentation. Do you have any suggestions?

Tags (4)
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
249 Views
Registered: ‎02-07-2018

Re: Upload .bit file to FPGA from APU running Petalinux 2018.3

Jump to solution

HI @p8grs 

 

Please refer this below links for loading the bitfile to FPGA from u-boot & Linux.

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842056/FPGA+Manager+ZCU102

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841847/Solution+ZynqMP+PL+Programming#SolutionZynqMPPLProgramming-FPGAprogrammingusingsysfsattributes

 

Thanks & eragrds

Aarivnd

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
2 Replies
Moderator
Moderator
250 Views
Registered: ‎02-07-2018

Re: Upload .bit file to FPGA from APU running Petalinux 2018.3

Jump to solution

HI @p8grs 

 

Please refer this below links for loading the bitfile to FPGA from u-boot & Linux.

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842056/FPGA+Manager+ZCU102

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841847/Solution+ZynqMP+PL+Programming#SolutionZynqMPPLProgramming-FPGAprogrammingusingsysfsattributes

 

Thanks & eragrds

Aarivnd

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
Contributor
Contributor
236 Views
Registered: ‎04-08-2019

Re: Upload .bit file to FPGA from APU running Petalinux 2018.3

Jump to solution

Hello aravindb,

Thank you very much, that's what I needed!!

0 Kudos