cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
sma-sergii
Visitor
Visitor
330 Views
Registered: ‎08-22-2019

Using uart0 on pmod pins on MicroZed board

I'm using GPS connected to PMOD connector of microzed board. uart0 pins are mio10 for rx and mio11 for tx. I cannot see messages from GPS and cannot see output from /dev/ttyPS1 to uart TX. Logic analyser shows that data is going from GPS to mio10 and nothing on mio11. device tree file is in the attchment

Tags (1)
0 Kudos
0 Replies