UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
7,236 Views
Registered: ‎09-24-2015

WiLink™ 8 Wi-Fi and BT/BLE Pmod Adaptor with linux

I recently brought a WiLink 8 Adaptor for my microzed board. On this page,http://microzed.org/sites/default/files/documentations/QSC-AES-PMOD-WILI... and the software guide, there are instructions on how to install this driver on a yocto based image . But I am running xillinux OS. How do I install the drivers on this existing system on the OS instead of on the SD card boot partition?

 

On this page, http://microzed.org/sites/default/files/documentations/GSG-AES-PMOD-WILI...

On page 24 of this document and appendix C, they say to mount a FAT32 mount SD card and run this command, ./microzed-wilink8-ramdisk-SDcard.sh 7010 to copy files to FAT32 partition. But, I have already have xillnux running which already has a FAT32 partition and ext4 partition. So, now with files already on the FAT32 partition, can I run ./microzed-wilink8-ramdisk-SDcard.sh 7010 without affecting the xillinux files?

Tags (2)
0 Kudos
3 Replies
Contributor
Contributor
7,209 Views
Registered: ‎09-24-2015

Re: WiLink™ 8 Wi-Fi and BT/BLE Pmod Adaptor with linux

Can anyone please reply back on this ?

0 Kudos
Xilinx Employee
Xilinx Employee
7,206 Views
Registered: ‎09-10-2008

Re: WiLink™ 8 Wi-Fi and BT/BLE Pmod Adaptor with linux

Hi,

 

I don't know anything about Xillinux as a distribution. Typically people ask their distribution questions like this.  I would probably look at the script contents to see what files it is writing, but it's likely the kernel modules for the driver such that there is no conflict with your existing filesystem.

 

Thanks

John

 

 

0 Kudos
Newbie pnefos
Newbie
536 Views
Registered: ‎11-07-2014

Re: WiLink™ 8 Wi-Fi and BT/BLE Pmod Adaptor with linux

I have been looking for a AES-PMOD-WILINK8-G adaptor board if you have one to sell. - Patrick

0 Kudos