cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
kayas257
Contributor
Contributor
1,355 Views
Registered: ‎06-03-2018

Yocto petalinux image

Jump to solution

Hello,

I have been trying to build a petalinux image using yocto, problem I am facing is to generate kernel fit image using yocto build system

Kernel fit image=kernel+ramdisk+devicetree

Can someone help me on this.

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
kayas257
Contributor
Contributor
1,274 Views
Registered: ‎06-03-2018

Hello,

Thanks for reply.

I found the solution in the following link

https://forums.xilinx.com/t5/Embedded-Linux/ZCU102-Yocto-BOOT-bin-generation/td-p/897696

 

Thanks & Regards,

Kayas

View solution in original post

0 Kudos
3 Replies
stephenm
Xilinx Employee
Xilinx Employee
1,279 Views
Registered: ‎09-12-2007

You can create the fit image manually, and use mkimage to create the image

Steps are shown here

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841722/ZCU102+Image+creation+in+OSL+flow

 

This can be done in yocto too. I'll dig out the recipe later.

0 Kudos
gsatish10
Explorer
Explorer
1,278 Views
Registered: ‎06-03-2015

Hi

check the yocto meta-**** layers support added in the build system & .conf file

output is in output/target/images/***.fit images 

Thnaks & Regards

Satish G

G Satish Kumar
0 Kudos
kayas257
Contributor
Contributor
1,275 Views
Registered: ‎06-03-2018

Hello,

Thanks for reply.

I found the solution in the following link

https://forums.xilinx.com/t5/Embedded-Linux/ZCU102-Yocto-BOOT-bin-generation/td-p/897696

 

Thanks & Regards,

Kayas

View solution in original post

0 Kudos