UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer shyamthella
Observer
98 Views
Registered: ‎04-20-2019

ZC702 load uboot and image.ub to RAM from JTAG and boot

Hi All,

I am trying to boot up ZC702 with prebuilt images by downloading u-boot.elf and image.ub to RAM. After that execute u-boot.elf and form uboot command line do "bootm to image.ub load address"

This is working and kernel is booting but file system is not mounting. It is stucking after some time. Attached log.

The same images with SD boot works fine. File system is also mounted properly but when I load images to RAM and try filesystem is not mounting.

Regards,

Shyam

0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
60 Views
Registered: ‎06-27-2017

Re: ZC702 load uboot and image.ub to RAM from JTAG and boot

Hi @shyamthella ,

Can you please program the bitstream(system.bit) to ZC702 and try?

Best Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.
0 Kudos
Observer shyamthella
Observer
53 Views
Registered: ‎04-20-2019

Re: ZC702 load uboot and image.ub to RAM from JTAG and boot

Hi kranthi,

I moved to ZCU102 for my development.
I will try this in free time and update here.

Regards,
Shyam

0 Kudos