cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant
Participant
1,443 Views
Registered: ‎11-26-2017

ZCU102 prebuild Ubuntu Desktop not working

Jump to solution

Hello, 

I'm working with the ZCU102 running Ubuntu with Petalinux for a while now and I'm currently trying to get a graphical output on my desktop. 

I followed this tutorial: Ubuntu Desktop Tutorial

First I tried to build my image from source but got several errors while booting, so I tried the prebuild image.

This one boots up correctly I think, but I can't get any output on my desktop (tried two different ones).

This is what the console shows while booting up:

U-Boot 2018.01 (Jun 08 2018 - 01:05:59 -0400) Xilinx ZynqMP ZCU102 rev1.0

I2C:   ready
DRAM:  4 GiB
EL Level:       EL2
Chip ID:        zu9eg
MMC:   sdhci@ff170000: 0 (SD)
SF: Detected n25q512a with page size 512 Bytes, erase size 128 KiB, total 128 Mi                                                                                                                                                             B
*** Warning - bad CRC, using default environment

In:    serial@ff000000
Out:   serial@ff000000
Err:   serial@ff000000
Model: ZynqMP ZCU102 Rev1.0
Board: Xilinx ZynqMP
Bootmode: LVL_SHFT_SD_MODE1
Net:   ZYNQ GEM: ff0e0000, phyaddr c, interface rgmii-id

Warning: ethernet@ff0e0000 MAC addresses don't match:
Address in ROM is          ff:ff:ff:ff:ff:ff
Address in environment is  00:0a:35:00:22:01
eth0: ethernet@ff0e0000
U-BOOT for xilinx-zcu102-2018_1

ethernet@ff0e0000 Waiting for PHY auto negotiation to complete... done
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.101 (255 ms)
Hit any key to stop autoboot:  0
Device: sdhci@ff170000
Manufacturer ID: 12
OEM: 1017
Name: SDU1
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 7.3 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading image.ub
7583392 bytes read in 511 ms (14.2 MiB/s)
## Loading kernel from FIT Image at 10000000 ...
   Using 'conf@system-top.dtb' configuration
   Trying 'kernel@1' kernel subimage
     Description:  Linux kernel
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x10000108
     Data Size:    7540046 Bytes = 7.2 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00080000
     Entry Point:  0x00080000
     Hash algo:    sha1
     Hash value:   0d774f93f339a2c5ab055dd4dc74f78b9a3a05c0
   Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 10000000 ...
   Using 'conf@system-top.dtb' configuration
   Trying 'fdt@system-top.dtb' fdt subimage
     Description:  Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x10730f5c
     Data Size:    41421 Bytes = 40.5 KiB
     Architecture: AArch64
     Hash algo:    sha1
     Hash value:   137c6fef338e1d8cd471cf408dc011238ce18769
   Verifying Hash Integrity ... sha1+ OK
   Booting using the fdt blob at 0x10730f5c
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 0000000007ff2000, end 0000000007fff1cc ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.0-xilinx-v2018.1 (oe-user@oe-host) (gcc versio                                                                                                                                                             n 7.2.0 (GCC)) #2 SMP Fri Jun 8 01:04:58 EDT 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: ZynqMP ZCU102 Rev1.0
[    0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
[    0.000000] bootconsole [cdns0] enabled
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 1024 MiB at 0x000000003fc00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 22 pages/cpu @ffffffc87ff61000 s50584 r8192 d313                                                                                                                                                             36 u90112
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1033987
[    0.000000] Kernel command line: earlycon clk_ignore_unused earlyprintk root=                                                                                                                                                             /dev/mmcblk0p2 rw rootwait cma=1024M
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes                                                                                                                                                             )
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB [mem 0x3bc00000-0x3fc00000] (64MB) mapped at [fff                                                                                                                                                             fffc03bc00000-ffffffc03fbfffff]
[    0.000000] Memory: 2995596K/4193280K available (11260K kernel code, 1210K rw                                                                                                                                                             data, 3224K rodata, 1024K init, 2175K bss, 149108K reserved, 1048576K cma-reserv                                                                                                                                                             ed)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 M                                                                                                                                                             B)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 G                                                                                                                                                             B)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008b80000   ( 11264 K                                                                                                                                                             B)
[    0.000000]     .rodata : 0xffffff8008b80000 - 0xffffff8008eb0000   (  3264 K                                                                                                                                                             B)
[    0.000000]       .init : 0xffffff8008eb0000 - 0xffffff8008fb0000   (  1024 K                                                                                                                                                             B)
[    0.000000]       .data : 0xffffff8008fb0000 - 0xffffff80090dea00   (  1211 K                                                                                                                                                             B)
[    0.000000]        .bss : 0xffffff80090dea00 - 0xffffff80092fe948   (  2176 K                                                                                                                                                             B)
[    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 K                                                                                                                                                             B)
[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 M                                                                                                                                                             B)
[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 G                                                                                                                                                             B maximum)
[    0.000000]               0xffffffbf00000000 - 0xffffffbf1dc00000   (   476 M                                                                                                                                                             B actual)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc880000000   ( 34816 M                                                                                                                                                             B)
[    0.000000] ftrace: allocating 38418 entries in 151 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU event tracing is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:                                                                                                                                                              0x170f8dc196, max_idle_ns: 440795203664 ns
[    0.000003] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 43980                                                                                                                                                             46511099ns
[    0.008361] Console: colour dummy device 80x25
[    0.012621] console [tty0] enabled
[    0.015987] bootconsole [cdns0] disabled
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.0-xilinx-v2018.1 (oe-user@oe-host) (gcc versio                                                                                                                                                             n 7.2.0 (GCC)) #2 SMP Fri Jun 8 01:04:58 EDT 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: ZynqMP ZCU102 Rev1.0
[    0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
[    0.000000] bootconsole [cdns0] enabled
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 1024 MiB at 0x000000003fc00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 22 pages/cpu @ffffffc87ff61000 s50584 r8192 d313                                                                                                                                                             36 u90112
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1033987
[    0.000000] Kernel command line: earlycon clk_ignore_unused earlyprintk root=                                                                                                                                                             /dev/mmcblk0p2 rw rootwait cma=1024M
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes                                                                                                                                                             )
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB [mem 0x3bc00000-0x3fc00000] (64MB) mapped at [fff                                                                                                                                                             fffc03bc00000-ffffffc03fbfffff]
[    0.000000] Memory: 2995596K/4193280K available (11260K kernel code, 1210K rw                                                                                                                                                             data, 3224K rodata, 1024K init, 2175K bss, 149108K reserved, 1048576K cma-reserv                                                                                                                                                             ed)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 M                                                                                                                                                             B)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 G                                                                                                                                                             B)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008b80000   ( 11264 K                                                                                                                                                             B)
[    0.000000]     .rodata : 0xffffff8008b80000 - 0xffffff8008eb0000   (  3264 K                                                                                                                                                             B)
[    0.000000]       .init : 0xffffff8008eb0000 - 0xffffff8008fb0000   (  1024 K                                                                                                                                                             B)
[    0.000000]       .data : 0xffffff8008fb0000 - 0xffffff80090dea00   (  1211 K                                                                                                                                                             B)
[    0.000000]        .bss : 0xffffff80090dea00 - 0xffffff80092fe948   (  2176 K                                                                                                                                                             B)
[    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 K                                                                                                                                                             B)
[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 M                                                                                                                                                             B)
[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 G                                                                                                                                                             B maximum)
[    0.000000]               0xffffffbf00000000 - 0xffffffbf1dc00000   (   476 M                                                                                                                                                             B actual)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc880000000   ( 34816 M                                                                                                                                                             B)
[    0.000000] ftrace: allocating 38418 entries in 151 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU event tracing is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:                                                                                                                                                              0x170f8dc196, max_idle_ns: 440795203664 ns
[    0.000003] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 43980                                                                                                                                                             46511099ns
[    0.008361] Console: colour dummy device 80x25
[    0.012621] console [tty0] enabled
[    0.015987] bootconsole [cdns0] disabled
[    0.019898] Calibrating delay loop (skipped), value calculated using timer fr                                                                                                                                                             equency.. 199.98 BogoMIPS (lpj=399960)
[    0.019914] pid_max: default: 32768 minimum: 301
[    0.020027] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.020046] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.020652] ASID allocator initialised with 65536 entries
[    0.020711] Hierarchical SRCU implementation.
[    0.020923] EFI services will not be available.
[    0.020950] zynqmp_plat_init Platform Management API v1.0
[    0.020959] zynqmp_plat_init Trustzone version v1.0
[    0.021072] smp: Bringing up secondary CPUs ...
[    0.021354] Detected VIPT I-cache on CPU1
[    0.021382] CPU1: Booted secondary processor [410fd034]
[    0.021693] Detected VIPT I-cache on CPU2
[    0.021713] CPU2: Booted secondary processor [410fd034]
[    0.022012] Detected VIPT I-cache on CPU3
[    0.022032] CPU3: Booted secondary processor [410fd034]
[    0.022078] smp: Brought up 1 node, 4 CPUs
[    0.022115] SMP: Total of 4 processors activated.
[    0.022125] CPU features: detected feature: 32-bit EL0 Support
[    0.022137] CPU: All CPU(s) started at EL2
[    0.022154] alternatives: patching kernel code
[    0.022915] devtmpfs: initialized
[    0.027813] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                                                                                             x_idle_ns: 7645041785100000 ns
[    0.027838] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.051104] xor: measuring software checksum speed
[    0.088057]    8regs     :  2292.000 MB/sec
[    0.128090]    8regs_prefetch:  2041.000 MB/sec
[    0.168126]    32regs    :  2811.000 MB/sec
[    0.208160]    32regs_prefetch:  2370.000 MB/sec
[    0.208169] xor: using function: 32regs (2811.000 MB/sec)
[    0.208240] pinctrl core: initialized pinctrl subsystem
[    0.208776] NET: Registered protocol family 16
[    0.209459] cpuidle: using governor menu
[    0.210058] vdso: 2 pages (1 code @ ffffff8008b86000, 1 data @ ffffff8008fb40                                                                                                                                                             00)
[    0.210076] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.210559] DMA: preallocated 256 KiB pool for atomic allocations
[    0.240331] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed
[    0.240938] ARM CCI_400_r1 PMU driver probed
[    0.245790] zynqmp-pinctrl ff180000.pinctrl: zynqmp pinctrl initialized
[    0.254038] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.320540] raid6: int64x1  gen()   400 MB/s
[    0.388516] raid6: int64x1  xor()   434 MB/s
[    0.456553] raid6: int64x2  gen()   681 MB/s
[    0.524640] raid6: int64x2  xor()   592 MB/s
[    0.592690] raid6: int64x4  gen()  1033 MB/s
[    0.660803] raid6: int64x4  xor()   733 MB/s
[    0.728869] raid6: int64x8  gen()   975 MB/s
[    0.796931] raid6: int64x8  xor()   741 MB/s
[    0.865038] raid6: neonx1   gen()   717 MB/s
[    0.933080] raid6: neonx1   xor()   833 MB/s
[    1.001187] raid6: neonx2   gen()  1158 MB/s
[    1.069233] raid6: neonx2   xor()  1185 MB/s
[    1.137330] raid6: neonx4   gen()  1494 MB/s
[    1.205370] raid6: neonx4   xor()  1425 MB/s
[    1.273468] raid6: neonx8   gen()  1645 MB/s
[    1.341526] raid6: neonx8   xor()  1523 MB/s
[    1.341535] raid6: using algorithm neonx8 gen() 1645 MB/s
[    1.341543] raid6: .... xor() 1523 MB/s, rmw enabled
[    1.341552] raid6: using neon recovery algorithm
[    1.343044] SCSI subsystem initialized
[    1.343222] usbcore: registered new interface driver usbfs
[    1.343259] usbcore: registered new interface driver hub
[    1.343298] usbcore: registered new device driver usb
[    1.343359] media: Linux media interface: v0.10
[    1.343387] Linux video capture interface: v2.00
[    1.343429] pps_core: LinuxPPS API ver. 1 registered
[    1.343438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                                                                                                                                             tti <giometti@linux.it>
[    1.343460] PTP clock support registered
[    1.343486] EDAC MC: Ver: 3.0.0
[    1.343803] zynqmp-ipi ff9905c0.mailbox: Probed ZynqMP IPI Mailbox driver.
[    1.343958] FPGA manager framework
[    1.344066] fpga-region fpga-full: FPGA Region probed
[    1.344162] Advanced Linux Sound Architecture Driver Initialized.
[    1.344422] Bluetooth: Core ver 2.22
[    1.344450] NET: Registered protocol family 31
[    1.344459] Bluetooth: HCI device and connection manager initialized
[    1.344472] Bluetooth: HCI socket layer initialized
[    1.344483] Bluetooth: L2CAP socket layer initialized
[    1.344504] Bluetooth: SCO socket layer initialized
[    1.345098] clocksource: Switched to clocksource arch_sys_counter
[    1.397395] VFS: Disk quotas dquot_6.6.0
[    1.397453] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.401741] NET: Registered protocol family 2
[    1.402043] TCP established hash table entries: 32768 (order: 6, 262144 bytes                                                                                                                                                             )
[    1.402255] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.402641] TCP: Hash tables configured (established 32768 bind 32768)
[    1.402709] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.402787] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.402938] NET: Registered protocol family 1
[    1.403117] RPC: Registered named UNIX socket transport module.
[    1.403128] RPC: Registered udp transport module.
[    1.403136] RPC: Registered tcp transport module.
[    1.403144] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.403567] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[    1.403728] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters av                                                                                                                                                             ailable
[    1.404407] audit: initializing netlink subsys (disabled)
[    1.404780] audit: type=2000 audit(1.388:1): state=initialized audit_enabled=                                                                                                                                                             0 res=1
[    1.404838] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    1.405618] NFS: Registering the id_resolver key type
[    1.405643] Key type id_resolver registered
[    1.405652] Key type id_legacy registered
[    1.405666] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.405689] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.434150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                                                                                             46)
[    1.434168] io scheduler noop registered
[    1.434176] io scheduler deadline registered
[    1.434199] io scheduler cfq registered (default)
[    1.434208] io scheduler mq-deadline registered
[    1.434217] io scheduler kyber registered
[    1.435515] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[    1.435958] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[    1.436136] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[    1.436307] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[    1.436479] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[    1.436650] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[    1.436826] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[    1.437000] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[    1.437203] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[    1.437444] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[    1.437611] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[    1.437778] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[    1.437941] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[    1.438107] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[    1.438275] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[    1.438443] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[    1.438605] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[    1.465188] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.468223] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.472495] brd: module loaded
[    1.475980] loop: module loaded
[    1.476757] ahci-ceva fd0c0000.ahci: couldn't get PHY in node ahci: -517
[    1.476917] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.478104] m25p80 spi0.0: n25q512a (131072 Kbytes)
[    1.478133] 4 ofpart partitions found on MTD device spi0.0
[    1.478142] Creating 4 MTD partitions on "spi0.0":
[    1.478155] 0x000000000000-0x000001e00000 : "boot"
[    1.478604] 0x000001e00000-0x000001e40000 : "bootenv"
[    1.478993] 0x000001e40000-0x000004240000 : "kernel"
[    1.479375] 0x000004240000-0x000008000000 : "spare"
[    1.480671] libphy: Fixed MDIO Bus: probed
[    1.481716] tun: Universal TUN/TAP device driver, 1.6
[    1.481878] CAN device driver interface
[    1.483937] macb ff0e0000.ethernet: Not enabling partial store and forward
[    1.484327] libphy: MACB_mii_bus: probed
[    1.485990] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e                                                                                                                                                             0000 irq 31 (00:0a:35:00:22:01)
[    1.486008] TI DP83867 ff0e0000.ethernet-ffffffff:0c: attached PHY driver [TI                                                                                                                                                              DP83867] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:0c, irq=POLL)
[    1.486584] usbcore: registered new interface driver asix
[    1.486639] usbcore: registered new interface driver ax88179_178a
[    1.486672] usbcore: registered new interface driver cdc_ether
[    1.486703] usbcore: registered new interface driver net1080
[    1.486734] usbcore: registered new interface driver cdc_subset
[    1.486765] usbcore: registered new interface driver zaurus
[    1.486808] usbcore: registered new interface driver cdc_ncm
[    1.487116] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
[    1.488200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.488427] usbcore: registered new interface driver uas
[    1.488468] usbcore: registered new interface driver usb-storage
[    1.488676] mousedev: PS/2 mouse device common for all mice
[    1.489054] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc                                                                                                                                                             0
[    1.489134] i2c /dev entries driver
[    1.490187] IR NEC protocol handler initialized
[    1.490198] IR RC5(x/sz) protocol handler initialized
[    1.490206] IR RC6 protocol handler initialized
[    1.490214] IR JVC protocol handler initialized
[    1.490222] IR Sony protocol handler initialized
[    1.490230] IR SANYO protocol handler initialized
[    1.490238] IR Sharp protocol handler initialized
[    1.490246] IR MCE Keyboard/mouse protocol handler initialized
[    1.490255] IR XMP protocol handler initialized
[    1.490980] usbcore: registered new interface driver uvcvideo
[    1.490990] USB Video Class driver (1.1.1)
[    1.491467] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer at ffffff800938                                                                                                                                                             d000 with timeout 10s
[    1.491661] Bluetooth: HCI UART driver ver 2.3
[    1.491673] Bluetooth: HCI UART protocol H4 registered
[    1.491682] Bluetooth: HCI UART protocol BCSP registered
[    1.491710] Bluetooth: HCI UART protocol LL registered
[    1.491720] Bluetooth: HCI UART protocol ATH3K registered
[    1.491729] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    1.491772] Bluetooth: HCI UART protocol Intel registered
[    1.491782] Bluetooth: HCI UART protocol QCA registered
[    1.491820] usbcore: registered new interface driver bcm203x
[    1.491854] usbcore: registered new interface driver bpa10x
[    1.491891] usbcore: registered new interface driver bfusb
[    1.491926] usbcore: registered new interface driver btusb
[    1.491936] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[    1.491986] usbcore: registered new interface driver ath3k
[    1.492118] EDAC MC: ECC not enabled
[    1.492275] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac control                                                                                                                                                             ler zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[    1.492784] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1199880                                                                                                                                                              KHz
[    1.492842] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed                                                                                                                                                              to: 1199999 KHz
[    1.493290] sdhci: Secure Digital Host Controller Interface driver
[    1.493300] sdhci: Copyright(c) Pierre Ossman
[    1.493308] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.537153] mmc0: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using A                                                                                                                                                             DMA 64-bit
[    1.537540] ledtrig-cpu: registered to indicate activity on CPUs
[    1.537688] usbcore: registered new interface driver usbhid
[    1.537697] usbhid: USB HID core driver
[    1.539637] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
[    1.541393] pktgen: Packet Generator for packet performance testing. Version:                                                                                                                                                              2.75
[    1.543792] Netfilter messages via NETLINK v0.30.
[    1.543906] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.544057] Initializing XFRM netlink socket
[    1.544172] NET: Registered protocol family 10
[    1.544592] Segment Routing with IPv6
[    1.544637] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.544828] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.545218] NET: Registered protocol family 17
[    1.545236] NET: Registered protocol family 15
[    1.545257] bridge: filtering via arp/ip/ip6tables is no longer available by                                                                                                                                                              default. Update your scripts to load br_netfilter if you need this.
[    1.545272] Ebtables v2.0 registered
[    1.545381] can: controller area network core (rev 20170425 abi 9)
[    1.545418] NET: Registered protocol family 29
[    1.545434] can: raw protocol (rev 20170425)
[    1.545443] can: broadcast manager protocol (rev 20170425 t)
[    1.545455] can: netlink gateway (rev 20170425) max_hops=1
[    1.545689] Bluetooth: RFCOMM TTY layer initialized
[    1.545705] Bluetooth: RFCOMM socket layer initialized
[    1.545722] Bluetooth: RFCOMM ver 1.11
[    1.545737] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.545746] Bluetooth: BNEP filters: protocol multicast
[    1.545757] Bluetooth: BNEP socket layer initialized
[    1.545766] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.545777] Bluetooth: HIDP socket layer initialized
[    1.545890] 9pnet: Installing 9P2000 support
[    1.545911] Key type dns_resolver registered
[    1.546349] registered taskstats version 1
[    1.547708] Btrfs loaded, crc32c=crc32c-generic
[    1.555463] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 42, base_baud =                                                                                                                                                              6249375) is a xuartps
[    1.676540] mmc0: new high speed SDHC card at address 59b4
[    1.683848] mmcblk0: mmc0:59b4 SDU1  7.26 GiB
[    1.708208]  mmcblk0: p1 p2
[    3.144114] console [ttyPS0] enabled
[    3.148314] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 43, base_baud =                                                                                                                                                              6249375) is a xuartps
[    3.159060] xilinx-psgtr fd400000.zynqmp_phy: Lane:1 type:8 protocol:4 pll_lo                                                                                                                                                             cked:yes
[    3.167302] PLL: shutdown
[    3.169989] PLL: shutdown
[    3.172917] PLL: enable
[    3.175415] PLL: shutdown
[    3.178773] PLL: enable
[    3.181240] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0:                                                                                                                                                              Xilinx DisplayPort Sound Codec probed
[    3.191830] xilinx-dp-snd-pcm fd4a0000.zynqmp-display:zynqmp_dp_snd_pcm0: Xil                                                                                                                                                             inx DisplayPort Sound PCM probed
[    3.201881] xilinx-dp-snd-pcm fd4a0000.zynqmp-display:zynqmp_dp_snd_pcm1: Xil                                                                                                                                                             inx DisplayPort Sound PCM probed
[    3.212020] xilinx-dp-snd-pcm fd4a0000.zynqmp-display:zynqmp_dp_snd_pcm1: ASo                                                                                                                                                             C: Failed to create component debugfs directory
[    3.223334] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xi                                                                                                                                                             linx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
[    3.235714] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xi                                                                                                                                                             linx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok
[    3.248367] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: Xi                                                                                                                                                             linx DisplayPort Sound Card probed
[    3.258474] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000
[    3.265395] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.271933] [drm] No driver support for vblank timestamp query.
[    3.277896] xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display (ops 0xffffff8                                                                                                                                                             008c45c70)
[    4.365196] [drm] Cannot find any crtc or sizes
[    4.369824] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display                                                                                                                                                              on minor 0
[    4.377856] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsys                                                                                                                                                             tem driver probed
[    4.386817] xilinx-psgtr fd400000.zynqmp_phy: Lane:3 type:3 protocol:2 pll_lo                                                                                                                                                             cked:yes
[    4.394633] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0                                                                                                                                                             x3 impl platform mode
[    4.403518] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fb                                                                                                                                                             s pio slum part ccc sds apst
[    4.413871] scsi host0: ahci-ceva
[    4.417337] scsi host1: ahci-ceva
[    4.420669] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x1                                                                                                                                                             00 irq 40
[    4.428518] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x1                                                                                                                                                             80 irq 40
[    4.438212] xilinx-psgtr fd400000.zynqmp_phy: Lane:2 type:0 protocol:3 pll_lo                                                                                                                                                             cked:yes
[    4.448227] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.453649] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu                                                                                                                                                             mber 1
[    4.461499] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100                                                                                                                                                              quirks 0x22010010
[    4.470151] xhci-hcd xhci-hcd.0.auto: irq 48, io mem 0xfe200000
[    4.476146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.482860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                                                                                                                             1
[    4.490062] usb usb1: Product: xHCI Host Controller
[    4.494918] usb usb1: Manufacturer: Linux 4.14.0-xilinx-v2018.1 xhci-hcd
[    4.501603] usb usb1: SerialNumber: xhci-hcd.0.auto
[    4.506754] hub 1-0:1.0: USB hub found
[    4.510448] hub 1-0:1.0: 1 port detected
[    4.514517] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.519933] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu                                                                                                                                                             mber 2
[    4.527625] usb usb2: We don't know the algorithms for LPM for this host, dis                                                                                                                                                             abling LPM.
[    4.535729] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    4.542440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                                                                                                                             1
[    4.549644] usb usb2: Product: xHCI Host Controller
[    4.554504] usb usb2: Manufacturer: Linux 4.14.0-xilinx-v2018.1 xhci-hcd
[    4.561189] usb usb2: SerialNumber: xhci-hcd.0.auto
[    4.566287] hub 2-0:1.0: USB hub found
[    4.569978] hub 2-0:1.0: 1 port detected
[    4.574982] pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulato                                                                                                                                                             r
[    4.584914] pca953x 0-0020: interrupt support not compiled in
[    4.590689] pca953x 0-0021: 0-0021 supply vcc not found, using dummy regulato                                                                                                                                                             r
[    4.600585] pca953x 0-0021: interrupt support not compiled in
[    4.607067] ina2xx 3-0040: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.613781] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.620485] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.627194] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.633908] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.640623] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.647325] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.654028] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.660738] ina2xx 3-004a: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.667453] ina2xx 3-004b: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.673759] i2c i2c-0: Added multiplexed i2c bus 3
[    4.679114] ina2xx 4-0040: power monitor ina226 (Rshunt = 2000 uOhm)
[    4.685823] ina2xx 4-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.692535] ina2xx 4-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.699240] ina2xx 4-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.705951] ina2xx 4-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.712668] ina2xx 4-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.719382] ina2xx 4-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.726088] ina2xx 4-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[    4.732399] i2c i2c-0: Added multiplexed i2c bus 4
[    4.738173] i2c i2c-0: Added multiplexed i2c bus 5
[    4.743023] i2c i2c-0: Added multiplexed i2c bus 6
[    4.747734] pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca95                                                                                                                                                             44
[    4.751308] ata2: SATA link down (SStatus 0 SControl 330)
[    4.751333] ata1: SATA link down (SStatus 0 SControl 330)
[    4.765815] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 33
[    4.773453] at24 7-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[    4.780106] i2c i2c-1: Added multiplexed i2c bus 7
[    4.785046] i2c i2c-1: Added multiplexed i2c bus 8
[    4.791818] si570 9-005d: registered, current frequency 300000000 Hz
[    4.798120] i2c i2c-1: Added multiplexed i2c bus 9
[    4.816825] si570 10-005d: registered, current frequency 148500000 Hz
[    4.823218] i2c i2c-1: Added multiplexed i2c bus 10
[    4.828241] i2c i2c-1: Added multiplexed i2c bus 11
[    4.833168] i2c i2c-1: Added multiplexed i2c bus 12
[    4.838088] i2c i2c-1: Added multiplexed i2c bus 13
[    4.843025] i2c i2c-1: Added multiplexed i2c bus 14
[    4.847835] pca954x 1-0074: registered 8 multiplexed busses for I2C switch pc                                                                                                                                                             a9548
[    4.855724] i2c i2c-1: Added multiplexed i2c bus 15
[    4.860649] i2c i2c-1: Added multiplexed i2c bus 16
[    4.865574] i2c i2c-1: Added multiplexed i2c bus 17
[    4.870829] i2c i2c-1: Added multiplexed i2c bus 18
[    4.875758] i2c i2c-1: Added multiplexed i2c bus 19
[    4.880690] i2c i2c-1: Added multiplexed i2c bus 20
[    4.885622] i2c i2c-1: Added multiplexed i2c bus 21
[    4.890550] i2c i2c-1: Added multiplexed i2c bus 22
[    4.895352] pca954x 1-0075: registered 8 multiplexed busses for I2C switch pc                                                                                                                                                             a9548
[    4.902927] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 34
[    4.910059] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.916863] rtc_zynqmp ffa60000.rtc: setting system clock to 2018-12-04 17:08                                                                                                                                                             :22 UTC (1543943302)
[    4.925785] clk: Not disabling unused clocks
[    4.930013] ALSA device list:
[    4.932920]   #0: DisplayPort monitor
[    4.938143] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 sub                                                                                                                                                             system
[    5.225182] EXT4-fs (mmcblk0p2): recovery complete
[    5.234910] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O                                                                                                                                                             pts: (null)
[    5.242944] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    5.252796] devtmpfs: mounted
[    5.256866] Freeing unused kernel memory: 1024K
[    5.501116] [drm] Cannot find any crtc or sizes

Welcome to Ubuntu 15.04!

Cannot add dependency job for unit org.freedesktop.resolve1.busname, ignoring: U                                                                                                                                                             nit org.freedesktop.resolve1.busname failed to load: No such file or directory.
[  OK  ] Reached target Swap.
[  OK  ] Created slice Root Slice.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Created slice System Slice.
         Mounting Debug File System...
         Starting Load Kernel Modules...
         Starting Increase datagram queue length...
[  OK  ] Started Braille Device Support.
         Starting Braille Device Support...
[  OK  ] Started Read required files in advance.
         Starting Read required files in advance...
         Starting Setup Virtual Console...
         Mounting POSIX Message Queue File System...
         Starting Nameserver information manager...
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
         Mounting Temporary Directory...
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
[  OK  ] Listening on networkd rtnetlink socket.
[  OK  ] Reached target Remote File Systems (Pre).
         Starting Create Static Device Nodes in /dev...
[  OK  ] Created slice system-getty.slice.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Started Boot Process Profiler.
         Starting Boot Process Profiler...
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
         Mounting Huge Pages File System...
[  OK  ] Started Setup Virtual Console.
[FAILED] Failed to start Load Kernel Modules.
See "systemctl status systemd-modules-load.service" for details.
systemd-modules-load.service failed.
         Starting Apply Kernel Variables...
         Mounting Configuration File System...
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Load/Save Random Seed...
systemd-bootchart.service failed.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Started Increase datagram queue length.
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
ureadahead.service failed.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Nameserver information manager.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Tell Plymouth To Write Out Runtime Data...
[  OK  ] Reached target Remote File Systems.
         Starting Wait for all "auto" /etc/n... up for network-online.target...
         Starting Set console keymap...
         Starting LSB: Raise network interfaces....
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[FAILED] Failed to start Set console keymap.
See "systemctl status console-setup.service" for details.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
         Starting Network Time Synchronization...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started udev Kernel Device Manager.
         Starting Copy rules generated while the root was ro...
[  OK  ] Started Copy rules generated while the root was ro.
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/ttyPS0.
[  OK  ] Created slice system-ifup.slice.
[  OK  ] Started ifup for can0.
         Starting ifup for can0...
[  OK  ] Started ifup for eth0.
         Starting ifup for eth0...
[  OK  ] Started ifup for sit0.
         Starting ifup for sit0...
[  OK  ] Started LSB: Raise network interfaces..
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on OpenBSD Secure Shell server socket.
         Starting Restore Sound Card State...
[  OK  ] Listening on CUPS Scheduler.
[  OK  ] Reached target Timers.
[  OK  ] Reached target Paths.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Reached target Containers.
         Starting System Logging Service...
         Starting LSB: automatic crash report generation...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
         Starting Initialize hardware monitoring sensors...
         Starting RealtimeKit Scheduling Policy Service...
[  OK  ] Started Run anacron jobs.
         Starting Run anacron jobs...
         Starting Modem Manager...
[  OK  ] Started Cgroup management daemon.
         Starting Cgroup management daemon...
         Starting Daemon for power management...
         Starting D-Bus System Message Bus...
[  OK  ] Started crash report submission daemon.
         Starting crash report submission daemon...
         Starting Restore /etc/resolv.conf i...e the ppp link was shut down....
[  OK  ] Started Regular background program processing daemon.
         Starting Regular background program processing daemon...
         Starting Accounts Service...
         Starting LSB: Speech Dispatcher...
         Starting Permit User Sessions...
         Starting Network Manager...
         Starting Login Service...
         Starting WPA supplicant...
[  OK  ] Started CUPS Scheduler.
         Starting CUPS Scheduler...
         Starting Provide limited super user privileges to specific users...
         Starting LSB: Start or stop the inetd daemon....
         Starting Perl-based spam filter using text analysis...
[  OK  ] Started System Logging Service.
[  OK  ] Started Wait for all "auto" /etc/ne...be up for network-online.target.
[  OK  ] Started Restore Sound Card State.
[  OK  ] Started LSB: automatic crash report generation.
[  OK  ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[FAILED] Failed to start RealtimeKit Scheduling Policy Service.
See "systemctl status rtkit-daemon.service" for details.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started Daemon for power management.
[  OK  ] Started WPA supplicant.
[  OK  ] Started Restore /etc/resolv.conf if...ore the ppp link was shut down..
[  OK  ] Started LSB: Speech Dispatcher.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Provide limited super user privileges to specific users.
[  OK  ] Started LSB: Start or stop the inetd daemon..
[  OK  ] Started Initialize hardware monitoring sensors.
[  OK  ] Started Login Service.
         Starting Authenticate and Authorize Users to Run Privileged Tasks...
         Starting GNOME Display Manager...
[  OK  ] Started Make remote CUPS printers available locally.
         Starting Make remote CUPS printers available locally...
         Starting Network Service...
[  OK  ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[  OK  ] Started Accounts Service.
[  OK  ] Started GNOME Display Manager.
[  OK  ] Started Network Service.
         Starting Network Name Resolution...
[  OK  ] Started Network Name Resolution.
[  OK  ] Started Network Manager.
         Starting Network Manager Wait Online...
[  OK  ] Reached target Network.
         Starting /etc/rc.local Compatibility...
[  OK  ] Started Modem Manager.
[  OK  ] Started Network Manager Wait Online.
[  OK  ] Reached target Network is Online.
         Starting LSB: Tool to automatically...ubmit kernel crash signatures...
         Starting LSB: disk temperature monitoring daemon...
[  OK  ] Started LSB: disk temperature monitoring daemon.
[  OK  ] Started LSB: Tool to automatically ... submit kernel crash signatures.
         Stopping GNOME Display Manager...
[  OK  ] Stopped GNOME Display Manager.
[  OK  ] Started Perl-based spam filter using text analysis.
         Starting Hostname Service...
[FAILED] Failed to start Hostname Service.
See "systemctl status systemd-hostnamed.service" for details.
[  OK  ] Started /etc/rc.local Compatibility.
         Starting Wait for Plymouth Boot Screen to Quit...
[  OK  ] Started Wait for Plymouth Boot Screen to Quit.
[  OK  ] Started Getty on tty1.
         Starting Getty on tty1...
[  OK  ] Started Serial Getty on ttyPS0.
         Starting Serial Getty on ttyPS0...
[  OK  ] Reached target Login Prompts.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Ubuntu 15.04 linaro-gnome ttyPS0

Do I need a special desktop to make it work or should it work with every desktop?

The board has two hdmi ports, I used the one on top because I think its output, is this correct? (I tested both ports btw)

How can I debug something like this? I'm just a student and not very experienced with those issues. 

 

Thanks a lot for any help!

Best regards 

Jonas

0 Kudos
1 Solution

Accepted Solutions
Participant
Participant
1,353 Views
Registered: ‎11-26-2017

Re: ZCU102 prebuild Ubuntu Desktop not working

Jump to solution

For everyone who has a similar issue:

I used the wrong displayport to HDMI adapter, you need an active one, not passive.

This one works for me: amazon

Best regards

Jonas

View solution in original post

0 Kudos
2 Replies
Participant
Participant
1,354 Views
Registered: ‎11-26-2017

Re: ZCU102 prebuild Ubuntu Desktop not working

Jump to solution

For everyone who has a similar issue:

I used the wrong displayport to HDMI adapter, you need an active one, not passive.

This one works for me: amazon

Best regards

Jonas

View solution in original post

0 Kudos
Highlighted
Contributor
Contributor
628 Views
Registered: ‎07-03-2019

Re: ZCU102 prebuild Ubuntu Desktop not working

Jump to solution

@jonas

Hi,

could you please share the files which you get booted up the zcu102 board .

 

 

 

Thanks & Regards

 

0 Kudos