cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
5,703 Views
Registered: ‎07-31-2017

ZCU106 BSP mali repo error

Jump to solution

On petabuild of xilinx-zcu106-2017.2 BSP, I see:

 

ERROR: libmali-xlnx-r7p0-00rel0-r0 do_fetch: Fetcher failure for URL: 'git://gitenterprise.xilinx.com/Graphics/mali400-xlnx-userspace.git;protocol=https;branch=master'. Unable to fetch URL from any source.

 

From a linux prompt, I try:  git clone https://gitenterprise.xilinx.com/Graphics/mali400-xlnx-userspace.git/


Cloning into 'mali400-xlnx-userspace'...
fatal: unable to access 'https://gitenterprise.xilinx.com/Graphics/mali400-xlnx-userspace.git/': Could not resolve host: gitenterprise.xilinx.com

 

Can I modify the build to skip Mali or let me know what the correct git URL is and which script to modify?  Thanks.

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Adventurer
Adventurer
8,384 Views
Registered: ‎07-31-2017

Re: ZCU106 BSP mali repo error

Jump to solution

Just updating what worked for me:

petalinux-build -x clean

petalinux-build -x mrproper

 

Need to regenerate some config files that mrproper removed:

petalinux-config

 

petalinux-config will create xilinx-zcu106-2017.2/build/conf/.  Edit local.conf

 

Replace URL that contains:

SOURCE_MIRROR_URL ?= "http://author.xilinx.com/...

 

With:

SOURCE_MIRROR_URL ?= "http://petalinux.xilinx.com/sswreleases/rel-v2017.2/downloads"

 

Save local.conf, then build:

petalinux-build

 

If you checking sstate takes too long, there's another post in the forum about that.  Hope this helps.

View solution in original post

0 Kudos
9 Replies
Highlighted
Xilinx Employee
Xilinx Employee
5,653 Views
Registered: ‎07-29-2011

Re: ZCU106 BSP mali repo error

Jump to solution

Hi

MALI kernel URL has been moved by ARM so you need to use the below workaround in local.conf.

 
INHERIT += "own-mirrors"
 
Hope that helps
 
Regards
Madhubala
0 Kudos
Highlighted
Visitor
Visitor
5,625 Views
Registered: ‎08-03-2017

Re: ZCU106 BSP mali repo error

Jump to solution

Hello madhuba,

I am experiencing the same problem with Mali as described by kallensf. I have attempted to use your workaround by modifying local.conf under the build directory as you suggested but still get:

 

"ERROR: libmali-xlnx-r7p0-00rel0-r0 do_fetch: Fetcher failure for URL: 'git://gitenterprise.xilinx.com/Graphics/mali400-xlnx-userspace.git;protocol=https;branch=master'. Unable to fetch URL from any source."

 

When trying to access the source URL you provided I get a 404 Error. Any advice on where to go from here would be highly appreciated.

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
5,603 Views
Registered: ‎07-29-2011

Re: ZCU106 BSP mali repo error

Jump to solution

Hi

Could you check your proxy settings,

This link should be accessible

https://gitenterprise.xilinx.com/Graphics/mali400-xlnx-userspace

 

Regards

Madhubala

 

 

0 Kudos
Highlighted
Visitor
Visitor
5,594 Views
Registered: ‎08-03-2017

Re: ZCU106 BSP mali repo error

Jump to solution

Hello again madhuba,

Thank you for your response but I still am having issues visiting https://gitenterprise.xilinx.com/Graphics/mali400-xlnx-userspace. I tried multiple computers on different networks and am still having problems connecting (server not found). I have also tried just visiting https://gitenterprise.xilinx.com/ with no success as well.

 

Thank you again.

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
5,388 Views
Registered: ‎06-29-2017

Re: ZCU106 BSP mali repo error

Jump to solution

https://forums.xilinx.com/t5/Embedded-Development-Tools/Petalinux-2017-2-rootfs-opencv-libmali-issue/td-p/781570

 

you have to provide through petalinux-config  ( I tested , working for me )

 

if you use source mirror URL, use without ?   ( I didnt test though ) 

0 Kudos
Highlighted
Adventurer
Adventurer
8,385 Views
Registered: ‎07-31-2017

Re: ZCU106 BSP mali repo error

Jump to solution

Just updating what worked for me:

petalinux-build -x clean

petalinux-build -x mrproper

 

Need to regenerate some config files that mrproper removed:

petalinux-config

 

petalinux-config will create xilinx-zcu106-2017.2/build/conf/.  Edit local.conf

 

Replace URL that contains:

SOURCE_MIRROR_URL ?= "http://author.xilinx.com/...

 

With:

SOURCE_MIRROR_URL ?= "http://petalinux.xilinx.com/sswreleases/rel-v2017.2/downloads"

 

Save local.conf, then build:

petalinux-build

 

If you checking sstate takes too long, there's another post in the forum about that.  Hope this helps.

View solution in original post

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
4,818 Views
Registered: ‎06-29-2017

Re: ZCU106 BSP mali repo error

Jump to solution

http://xkb/Pages/69/69564.aspx 

0 Kudos
Highlighted
Observer
Observer
2,791 Views
Registered: ‎04-18-2018

Re: ZCU106 BSP mali repo error

Jump to solution

This solution does not work for me for 2018.1

 

The fetch log shows that the mirror is not accessed at all.

0 Kudos
Highlighted
Voyager
Voyager
1,421 Views
Registered: ‎09-14-2016

Re: ZCU106 BSP mali repo error

Jump to solution

Hi all and @madhuba @vineethc

 

Same for rel-v2018.2...

 

Could you please tell us why on the branch rel-v2018.2 libmali-xlnx.bb is based on git version and not on sumo ?

 

https://github.com/Xilinx/meta-xilinx/tree/rel-v2018.2/meta-xilinx-bsp/recipes-graphics/libgles

 

https://github.com/Xilinx/meta-xilinx/tree/sumo/meta-xilinx-bsp/recipes-graphics/libgles

 

Thank you :)

 

Cheers,

Trigger

0 Kudos