09-16-2020 07:45 AM
09-23-2020 10:24 PM
HI johannes.eklange@trakkasystems.com
You can use any one set of images either BOOT. BIN & image.ub
BOOT.BIN includes -- zynqmp_fsbl.elf, pmufw.elf, system.bit, bl31.elf & u-boot
image.ub -- kernel image , DTB & rootfs
or
BOOT.BIN , Image & system.dtb files
Image -- Will only have kernel image, rootfs not includes DTB
Thanks & Regards
Aravind
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
---------------------------------------------------------------------------------------------
09-23-2020 11:56 PM
The reason the boards booted with different images was found in the UBOOT environmental settings stored in the QSPI. To be more specific I think the difference was found in the bootargs and the default boot cmd.