UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
196 Views
Registered: ‎06-19-2015

ZynqMP PCIe Endpoint as NIC

Hi,

I would like use ZynqMP PCIe as endpoint. If I insert the card in PC, it should enumerate as Ethernet interface. 

To do this what are the basic things to configure? I will run Linux OS in Zynq. What drivers/configuaration need to enable in Linux OS of the board?

Is it sufficient if i configure device class(Base class:0x02, Sub class:0x80, Interface:0x02 ) as Network Interface Card (NIC) in zynq bd configuaration?

Please help how to proceed?

Thanks

Madhu M

0 Kudos
2 Replies
Moderator
Moderator
151 Views
Registered: ‎04-24-2017

Re: ZynqMP PCIe Endpoint as NIC

Hi @madhu.mami60

Srinadh(@venkata) is our PCIe expert he should be able to help.

 

Thanks,
Sandeep
PetaLinux Yocto | Embedded SW Support

---------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.
---------------------------------------------------------------------------
0 Kudos
Explorer
Explorer
137 Views
Registered: ‎06-19-2015

Re: ZynqMP PCIe Endpoint as NIC

Hi @sandeepg

Thank you for your reference.

 

-Regards

0 Kudos