UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor tristalee
Visitor
366 Views
Registered: ‎01-18-2018

can't boot linux with HDMI output on zedboard from sd card

Hi, everyone!

 

I'm trying to boot zedboard from sd card and I built the boot image myself following the steps on:

https://wiki.analog.com/resources/tools-software/linux-drivers/platforms/zynq

 

The HDL design I used to export to the SDK is :

https://github.com/analogdevicesinc/hdl/tree/master/projects/adv7511/zed

The block design is shown in the attachment.

 

This design can run sucessfully with its no-OS software, however, it doesn't work when I used it to generate boot image. I was wondering that if this hdl design can be used in sd boot. If not, should I need to disable QUAD SPI?  

 

Thanks a lot!

Tags (2)
0 Kudos