cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
lim.junhyoung
Adventurer
Adventurer
1,776 Views
Registered: ‎03-27-2019

how to load BOOT.bin in uboot mode

Jump to solution

i want to load BOOT.bin in uboot mode. because i have been downloading it as jtag. so it was very slow.


In uboot mode I have a command called loady and I do not know how to use it. If you type loady, you will be writing to 0x1000000. I do not know if this is correct. Below is the partition information I set up.

image.png

What I'm wondering is

1. how to download uboot or kernel using serial in uboot mode.

2. How to download boot.bin using serial in uboot mode.

0 Kudos
1 Solution

Accepted Solutions
ritakur
Xilinx Employee
Xilinx Employee
1,758 Views
Registered: ‎09-01-2014
Please check the wiki page on downloading kernel image from u-boot.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842223/U-boot

View solution in original post

0 Kudos
1 Reply
ritakur
Xilinx Employee
Xilinx Employee
1,759 Views
Registered: ‎09-01-2014
Please check the wiki page on downloading kernel image from u-boot.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842223/U-boot

View solution in original post

0 Kudos