UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor bilucent
Visitor
1,750 Views
Registered: ‎05-09-2013

linux based embedded system on virtex 4 board

Hi all,

 

I am a newbie to embedded systems, I have a dini DN8000K10PCI virtex 4 board (VFX100and VLX160 chips) (http://www.dinigroup.com/new/DN8000k10PCI.php), and I need to 1- set up an embedded system, 2- set up a linux like OS on it 3- be able to communicate with it through ethernet and uart.

 

I have been fiddeling around with the XPS tool, BSB, and have generated some files which non have worked on the board not very surprisingly

 

I would highly appreiciate if some one with a bit of a patient mentor attitude! to kindly provide some supposedly good starting points, links, web sites, books etc... which I can get on the track and moving towards my desired system, in a timely manner ofcourse.

 

I will be happily respondant to any comments and questions on this,

 

Best,

Bijan

 

0 Kudos