UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer guidopc
Observer
114 Views
Registered: ‎04-04-2016

petalinux 2018.3 build failure

Hello there,

  • I have my board SOC hdf file ready.

petalinux-create was OK
petalinux-config --get-hw-description=< path-to-my-hdf-folder > was OK
petalinux-build failed:Capture.JPG

 

Something related with xlnk, it seems... can anyone help?

0 Kudos
2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
73 Views
Registered: ‎04-15-2011

回复: petalinux 2018.3 build failure

Hi, @guidopc 

Have you configured the kernel before building it?

Maybe you can disable APF dirver by "petalinux-config -c kernel"

Here is another workaround that you can try.

https://forums.xilinx.com/t5/Embedded-Linux/Petalinux-XLNK-compile-error/td-p/900950

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Observer guidopc
Observer
65 Views
Registered: ‎04-04-2016

回复: petalinux 2018.3 build failure

This worked in my case:

  • petalinux-config -c kernel

then

Device Drivers -> Staging drivers

Device Drivers -> Staging drivers -> Xilinx APF Accelerator Driver

Device Drivers -> Staging drivers -> Xilinx APF Accelerator Driver -> Yes

 

Device Drivers -> Userspace I/O Drivers

Device Drivers -> Userspace I/O Drivers -> Userspace I/O platform driver with generic IRQ handling

Device Drivers -> Userspace I/O Drivers -> Userspace I/O platform driver with generic IRQ handling -> Yes

 

make sure they are enabled with a * rather than an M,  then save and exit

0 Kudos