cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant
Participant
330 Views
Registered: ‎04-04-2016

petalinux 2018.3 build failure

Hello there,

  • I have my board SOC hdf file ready.

petalinux-create was OK
petalinux-config --get-hw-description=< path-to-my-hdf-folder > was OK
petalinux-build failed:Capture.JPG

 

Something related with xlnk, it seems... can anyone help?

0 Kudos
2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
289 Views
Registered: ‎04-15-2011

回复: petalinux 2018.3 build failure

Hi, @guidopc 

Have you configured the kernel before building it?

Maybe you can disable APF dirver by "petalinux-config -c kernel"

Here is another workaround that you can try.

https://forums.xilinx.com/t5/Embedded-Linux/Petalinux-XLNK-compile-error/td-p/900950

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Participant
Participant
281 Views
Registered: ‎04-04-2016

回复: petalinux 2018.3 build failure

This worked in my case:

  • petalinux-config -c kernel

then

Device Drivers -> Staging drivers

Device Drivers -> Staging drivers -> Xilinx APF Accelerator Driver

Device Drivers -> Staging drivers -> Xilinx APF Accelerator Driver -> Yes

 

Device Drivers -> Userspace I/O Drivers

Device Drivers -> Userspace I/O Drivers -> Userspace I/O platform driver with generic IRQ handling

Device Drivers -> Userspace I/O Drivers -> Userspace I/O platform driver with generic IRQ handling -> Yes

 

make sure they are enabled with a * rather than an M,  then save and exit

0 Kudos