01-24-2019 01:13 AM
Please follow the Document UG1144 for petalinux installation gude . This i svery good document.
03-11-2019 12:37 AM - edited 03-11-2019 01:16 AM
In order to fast ramp up with Ubuntu of my ZCU-102 Rev 1.1 EVB.
Is there Link for downloading img of pre-built of petalinux-v2018.3- run ubuntu or CentOS that tested and working ?
05-14-2019 08:11 AM
05-21-2019 05:18 AM - edited 05-21-2019 05:23 AM
Installing all the dependencies in Table 2-1: Packages and Linux Workstation Environments under the column (Ubuntu 16.04.3) solves the issues during installation.
For e.g. if any dependency is not pre-installed (or even not right version e.g gawk), the installer doesn't throw error directly, instead the installer fails with an indirect message like "bad address"
So better make sure the the listed dependencies are met before running the installer.
06-25-2019 12:40 PM
07-02-2019 11:43 AM
can u please tell me how did u solve the awk: read error (Bad address) because i am stuck in the same problem and i cannot find a solution
07-02-2019 10:57 PM - edited 07-03-2019 02:07 AM
Install the below dependencies as listed in PetaLinux Tools Documentation Reference Guide
for e.g. Ubuntu:
sudo apt-get install -y gcc gawk git make net-tools libncurses5-dev tftpd zlib1g-dev libssl-dev
flex bison libselinux1 gnupg wget diffstat chrpath socat xterm autoconf libtool tar unzip
texinfo zlib1g-dev gcc-multilib build-essential libsdl1.2-dev libglib2.0-dev zlib1g:i386
Also ensure you have reconfigured sh to bash
ls -l /bin/sh -> dash : Wrong
ls -l /bin/sh -> bash : Correct
If you system is not configured for bash, run
sudo dpkg-reconfigure dash
and select <No> in the window
This solves the awk bad address error and installation issues.
09-18-2019 02:38 AM
10-09-2019 03:43 AM
I am getting the same error now.
Could you please tell me what must be done to resolve it?
02-27-2020 02:17 AM
Run the comman
sudo apt install gawk
Then try to run the installer.
This solved my problem.