cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant
Participant
1,634 Views
Registered: ‎06-13-2019

petalinux-config

Jump to solution

Hi,

I tried to reconfigurate my petalinux project but I got the following errors:

(base) alexandre@alexandre-Latitude-5490:/home/Vivado/2019.1/Exemple2/xilinx-zcu102-2019.1$ petalinux-config --get-hw-description=/home/Vivado/2019.1/Exemple2/xilinx-zcu102-2019.1/hardware/xilinx-zcu102-2019.1/xilinx-zcu102-2019.1.sdk
INFO: Getting hardware description...
INFO: Rename edt_zcu102_wrapper.hdf to system.hdf
[INFO] generating Kconfig for project
[INFO] menuconfig project


*** End of the configuration.
*** Execute 'make' to start the build or try 'make help'.

[INFO] sourcing bitbake
[INFO] generating plnxtool conf
[INFO] generating meta-plnx-generated layer
ERROR: Failed to generate meta-plnx-generated layer
ERROR: Failed to config project.
ERROR: Get hw description Failed!.

Could you help me please?

 

Best regards

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Adventurer
Adventurer
1,530 Views
Registered: ‎12-26-2016

Re: petalinux-config

Jump to solution

Then you might have some misconfiguraitons on one of your machines ;)

Please note the system requirements in UG1144 and the needed tools. There might also be unsupported versions from Ubuntu18.0x and 2019.Y or else.

View solution in original post

0 Kudos
8 Replies
Highlighted
Moderator
Moderator
1,589 Views
Registered: ‎12-04-2016

Re: petalinux-config

Jump to solution

Hi @randriantsoa 

Can you please share the HDF, let me try to recreate the same and debug further?

0 Kudos
Highlighted
Participant
Participant
1,568 Views
Registered: ‎06-13-2019

Re: petalinux-config

Jump to solution

Hi, I tried to send you the hdf but I get the attached post error message.

Could you tell me why Xilinx forum didn't accept my hdf as attached file?

 

Best regards,

 

 

Post_error_message.PNG
0 Kudos
Highlighted
Adventurer
Adventurer
1,554 Views
Registered: ‎12-26-2016

Re: petalinux-config

Jump to solution

@randriantsoa  You can upload the hdf it with a .zip extension. You can view it with WinRar / 7zip / whatever. Simply rename it.

Silly that Xilinx doesn't allow their own file formats for upload...

0 Kudos
Highlighted
Participant
Participant
1,537 Views
Registered: ‎06-13-2019

Re: petalinux-config

Jump to solution

Hi,

I  executed  the same configuration command with another PC by using the same hdf. It worked.

So the problem didn't come from the hdf. It could come from either petalinux or the PC.

For the case where it didn't work, I used i5 7300U CPU, RAM 8 Go, 

About free disk space, df command gives :

Filesystem 1K-blocks Used Available Use% Mounted on
udev 3982820 0 3982820 0% /dev
tmpfs 802600 9688 792912 2% /run
/dev/sda5 49328432 21712048 25087472 47% /
tmpfs 4012988 252 4012736 1% /dev/shm
tmpfs 5120 4 5116 1% /run/lock
tmpfs 4012988 0 4012988 0% /sys/fs/cgroup
/dev/sda2 97280 30626 66654 32% /boot/efi
/dev/sda6 151991436 87755964 56491632 61% /home
tmpfs 802600 4 802596 1% /run/user/108
tmpfs 802600 76 802524 1% /run/user/1000

Do you have an idea?

Best regards,

 

0 Kudos
Highlighted
Adventurer
Adventurer
1,531 Views
Registered: ‎12-26-2016

Re: petalinux-config

Jump to solution

Then you might have some misconfiguraitons on one of your machines ;)

Please note the system requirements in UG1144 and the needed tools. There might also be unsupported versions from Ubuntu18.0x and 2019.Y or else.

View solution in original post

0 Kudos
Highlighted
Participant
Participant
1,523 Views
Registered: ‎06-13-2019

Re: petalinux-config

Jump to solution

I use ubuntu 16.04.

I will re-install petalinux.

 

Bst regards,

 

0 Kudos
Highlighted
929 Views
Registered: ‎09-10-2019

Re: petalinux-config

Jump to solution

Hi,I have met the same misconfiguration, have you correted the mistakes and sucesessfully reconfiged your HDF in your former PC?
Best regards

0 Kudos
Highlighted
Participant
Participant
674 Views
Registered: ‎06-13-2019

Re: petalinux-config

Jump to solution

Yes, I changed my PC and it works.

 

Best regards,

0 Kudos