UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor rofiq
Visitor
5,881 Views
Registered: ‎10-27-2015

petalinux error

Jump to solution

Hi All,

 

I newbie on PetaLinux

I have succesfull install and running PetaLinux before but after I reinstall my Ubuntu I got problem below

when I running command

$petalinux-boot --qemu --prebuilt 3

 

I got error message

qemu-system-aarch64: unable to get size of device tree file '/tmp/tmp.lovd81MJJ0

qemu-system-aarch64: Error: unable to load Device Tree /tmp/tmp.lovd81MJJ0

 

I also have problem when run command $petalinux-boot --jtag --prebuilt 3

it show following error

ERROR: No load address provided for non-ELF file "/home/rofiq/Petalinux/Avnet-Digilent-Zedboard-2015.2/pre-built/linux/image/zynq_fsbl.elf"

 

I have no idea how to tackle this problem

 

any help and any solution to fix this?

 

thanks

 
0 Kudos
1 Solution

Accepted Solutions
Visitor rofiq
Visitor
11,328 Views
Registered: ‎10-27-2015

Re: petalinux error

Jump to solution

Hi thank you for the reply

 

I'm using petalinux 2015.2.1

My problem has solved by insall QEMU using command below

sudo apt-get install qemu-system-arm:i386

 

0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
5,842 Views
Registered: ‎07-01-2010

Re: petalinux error

Jump to solution

@rofiq

 

What version of Petalinux are you using?

Are you using the Petalinux BSP for any reference board or using the custom BSP/hardware?

 

Can you please attach project to verify the details?

 

Regards,

Achutha

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------
0 Kudos
Visitor rofiq
Visitor
11,329 Views
Registered: ‎10-27-2015

Re: petalinux error

Jump to solution

Hi thank you for the reply

 

I'm using petalinux 2015.2.1

My problem has solved by insall QEMU using command below

sudo apt-get install qemu-system-arm:i386

 

0 Kudos