UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor x_tit
Visitor
999 Views
Registered: ‎03-26-2018

ssh does not work

Jump to solution

Hello,

I have no idea how to ssh into petalinux running on Zybo.

I ran ssh root@192.168.1.5 but it had no response and finally time out.

ssh into my laptop from petalinux does not work either and it says "No route to host".

 

If the usage of ssh on petalinux is documented,please give me the link.(I did not find it)

Thank you.

 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
1,161 Views
Registered: ‎08-02-2011

Re: ssh does not work

Jump to solution
Did you enable and configure the SSH server in petalinux? Do you see the ssh daemon running on the target? Confirm the network interface configuration is correct (IP Address, netmask, etc)? Connected to the board via ethernet? Can you ping it? Try temporarily disable firewall?
www.xilinx.com
0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
1,162 Views
Registered: ‎08-02-2011

Re: ssh does not work

Jump to solution
Did you enable and configure the SSH server in petalinux? Do you see the ssh daemon running on the target? Confirm the network interface configuration is correct (IP Address, netmask, etc)? Connected to the board via ethernet? Can you ping it? Try temporarily disable firewall?
www.xilinx.com
0 Kudos
Visitor x_tit
Visitor
925 Views
Registered: ‎03-26-2018

Re: ssh does not work

Jump to solution

Thank you very much.

I did not set my IP and netmask correctly.

0 Kudos