cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
5,998 Views
Registered: ‎10-01-2007

uClinux on XUPV5

Jump to solution
Hello.

My goal is to choose the best product and way to implement uClinux on Xilinx XUPV5 board.

After search on internet I found several tutorials which describe similar technology but use different tools.

Bellow are links and AP which are useful:

http://svenand.blogdrive.com/archive/82.html

http://xilinx.wikidot.com/

http://petalogix.com/

XAAP730

 

If I understood there are two possibilities:

 

http://xilinx.wikidot.com/ describes possibility to download required files with git tools from: http://git.xilinx.com/cgi-bin/gitweb.cgi

How to download petalinux from http://petalogix.com/ at all? It’s free at all?

What is the best solution if  I use ISE 11.4 on Windows OS and kernel want to compile on PC with Ubuntu distribution?

 

uClinux  I have implemented on STM32 microcontrollers. Steps were as fallows:

  1. uClinux distribution was patched with additional lib from ST (Ubuntu). Toolchain for compiling was installed
  2. Command “make menuconfig” opened Kconfig window and kernel was created with several configurations and  make” command (Ubuntu)
  3. .bin files was created, copied to Windows and connected to one dfu file with ST Dfuse tools. (Windows)

I expect something similar for Xilinx board (XUPV5 – like ML505) too: I want to create uClinux kernel in Ubuntu OS and “connect”  kernel with EDK project in Windows.

Please give me an advice.

Thank you!

 

 

Message Edited by vytautas on 01-18-2010 12:44 PM
Message Edited by vytautas on 01-18-2010 01:59 PM
Best Regards,
Vytautas
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Anonymous
Not applicable
6,829 Views

Hi there - for questions related to petalinux, you will probably have better luck using their mailing list. You can find more info here:

 

http://www.petalogix.com/univ/documentation/userguide/introduction-copyright-information/GettingHelp/

 

Regards,

Terry

 

 

 

View solution in original post

0 Kudos
3 Replies
Highlighted
Explorer
Explorer
5,962 Views
Registered: ‎10-01-2007

Hello.

I have downloaded petalinux petalinux-v0.40-final.tar.gz. 

Does Ubuntu 9.10 supports this tools? What about possibility to generate kernel under Ubuntu, but EDK use under Windows platforms?

Thanks

Best Regards,
Vytautas
0 Kudos
Highlighted
Anonymous
Not applicable
6,830 Views

Hi there - for questions related to petalinux, you will probably have better luck using their mailing list. You can find more info here:

 

http://www.petalogix.com/univ/documentation/userguide/introduction-copyright-information/GettingHelp/

 

Regards,

Terry

 

 

 

View solution in original post

0 Kudos
Highlighted
Anonymous
Not applicable
5,662 Views

I am working on the same project on the same platform (ML 509). However, I couldn't find a link to download the petalinux distribution files. Can you tell where you got them and how has your experience been using petalinux?

 

Thanks,

 

Faycel

Tags (2)
0 Kudos