UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Participant diy_a
Participant
1,961 Views
Registered: ‎03-20-2017

How can i port .mcs file to ZYBO through QSPI flash?

I have been trying to flash a boot image(.mcs file) to zybo through qspi flash. I have created a boot image with the following files.

1. fsbl

2. bitstream

3. u-boot

4. uimage

5. device tree

6. ramdisk.image.gz

 

what are the offset values should i given during creating the boot image and

what is the offset value should i given during "Program the flash memory" window box ?

From where should i get those offset values?

 

thanks in advance.

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
1,921 Views
Registered: ‎08-01-2008

Re: How can i port .mcs file to ZYBO through QSPI flash?

check this tutorial it may help you
https://reference.digilentinc.com/learn/programmable-logic/tutorials/htsspisf/start
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos