UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor cswisher_126
Visitor
8,082 Views
Registered: ‎06-16-2015

Micro blaze board change

How do I update microblaze to switch from the ML605 board to the KC705 board? The error is attached. My .mhs file is for Ml605. 

 

Thanks for your help!

 

ERROR.png
0 Kudos
4 Replies
Scholar trenz-al
Scholar
8,076 Views
Registered: ‎11-09-2013

Re: Micro blaze board change

MHS ???

 

delete it!

 

Vivado 201.4 or 2015.2 has to be used.

0 Kudos
Visitor cswisher_126
Visitor
8,070 Views
Registered: ‎06-16-2015

Re: Micro blaze board change

Thanks trenz-al, 

 

You mean delete the microblaze.mhs file and open the project in vivado (I have to use 13.4 for a collaborator)? I know my collaborator is using 13.4 sucessfully with this same source code but a different board. So 13.4 must work.

 

Thanks again for your help!

 

 

0 Kudos
Xilinx Employee
Xilinx Employee
8,059 Views
Registered: ‎08-02-2007

Re: Micro blaze board change

hi,

 

if you are targeting KC705 then use the example design available here.

http://www.xilinx.com/support/documentation/boards_and_kits/kintex-7/kc705-bist-pdf-xtp102-14.4.pdf

 

--hs

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Scholar sampatd
Scholar
7,997 Views
Registered: ‎09-05-2011

Re: Micro blaze board change

You will need to create a new system using Vivado targeting KC705 board.

To get started with embedded design using Vivado, refer to the following documents
http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_1/ug898-vivado-embedded-design.pdf

http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_1/ug940-vivado-tutorial-embedded-design.pdf
0 Kudos