UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Newbie niedballa
Newbie
214 Views
Registered: ‎02-11-2019

Multiple CAN-FD interfaces in Zynq Ultrascale+

Jump to solution

We need 4x CAN + 2x CAN-FD interfaces in Zynq Ultrascale+ ZU3EG. Is it possible to implement this in PL an connect them over AXI to the RPU? What is the limiting factor for the number of CAN-interfaces in ZU3EG?

Thanks a lot in advance!

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
178 Views
Registered: ‎07-31-2012

Re: Multiple CAN-FD interfaces in Zynq Ultrascale+

Jump to solution

hi @niedballa ,

You can use AXI CAN and AXI CAN-FD instantiations in PL.

There is no limitation.

 

Regards

Praveen


-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
2 Replies
Moderator
Moderator
179 Views
Registered: ‎07-31-2012

Re: Multiple CAN-FD interfaces in Zynq Ultrascale+

Jump to solution

hi @niedballa ,

You can use AXI CAN and AXI CAN-FD instantiations in PL.

There is no limitation.

 

Regards

Praveen


-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Newbie niedballa
Newbie
155 Views
Registered: ‎02-11-2019

Re: Multiple CAN-FD interfaces in Zynq Ultrascale+

Jump to solution

Thanks a lot!

0 Kudos