UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
140 Views
Registered: ‎04-21-2017

Pmod AD1 on Microblaze Spartan7

Dear Forum,

I have a simple Microblaze design running with a Pmod AD1 plugged into the Arty-S750 dev-kit. Using the example code that ships with the AD1 I am getting a consol output for the 1st channel, but the SW then stalls and there is no output for channel 2 nor any stream of data for channel 1.

I can't figure out why I am getting a one-shot output on channel 1 when the While(1) loop seems to start ok.

Any pointers to an example design fr this hardware or thoughts as to why the application is stalling withing the while loop would be appreciated.

 

TTFN.

 

DJE666

0 Kudos